Kinetic study of CO desorption from cathodic electrochemically treated carbon paper supported Pt electrodes

Document Type : Research Paper

Authors

1 Department of Chemical Engineering, Amirkabir University of Technology

2 Department of Chemistry, Amirkabir University of Technology

Abstract

Platinum particles were grown directly by an electrodeposition process on electrochemically treated carbon paper (CP) for kinetic study of carbon monoxide (CO) desorption. The treatment on CP was performed by applying −2 V for cathodic oxidation over 5 min. Treated CP was characterized by FTIR to investigate the oxygen groups on its surface. CO surface coverage at each temperature was determined by monitoring changes in Had (adsorbed hydrogen) desorption charge during CO stripping at different desorption times (300 to 1800 s). CO coverage of the cathodic electrode is lower than non-treated one in all temperatures. Desorption rate constants were calculated for cathodic and non-treated electrodes. From 25 to 85 °C, rate constants for cathodic electrode are higher than the non-treated electrode at all temperatures. The activation energies for desorption, estimated from data obtained by the experiments, are 28480 and 18900 J.mol-1 for non-treated and cathodic electrode, respectively. This shows that CO desorption is easier on the surface of the cathodic electrode than non-treated electrode due to the presence of oxygen surface groups. 

Keywords

Main Subjects


 
[1] López-Cudero A., Solla-Gullón J., Herrero E., Aldaz A.and Feliu J. M., “CO electrooxidation on carbon supported platinum nanoparticles: Effect of aggregation", Journal of Electroanalytical Chemistry, 2010, 644: 117.
 
[2] sKangasniemi K. H., Condit D.and Jarvi T., "Characterization of vulcan electrochemically oxidized under simulated PEM fuel cell conditions", Journal of The Electrochemical Society, 2004, 151: E125.
 
[3] Jovanović V. M., Tripković D., Tripković A., Kowal A.andStoch J., "Oxidation of formic acid on platinum electrodeposited on polished and oxidized glassy carbon", Electrochemistry communications, 2005, 7: 1039.
 
[4] Hsieh Y.-C., Chang L.-C., Wu P.-W., Lee J.-F.andLiao C.-H., "Facile Surface Functionalization of Carbon/Nafion for Enhancement of Methanol Electro-Oxidation", ECS Transactions, 2010, 33: 2017.
 
[5] Sieben J. M., Duarte M. M.andMayer C., "Electro-Oxidation of Methanol on Pt-Ru Nanostructured Catalysts Electrodeposited onto Electroactivated Carbon Fiber Materials", ChemCatChem, 2010, 2: 182.
 
[6] Jovanović V., Terzić S., Tripković A., Popović K. D.andLović J., "The effect of electrochemically treated glassy carbon on the activity of supported Pt catalyst in methanol oxidation", Electrochemistry communications, 2004, 6: 1254.
 
[7] Bayati M., Abad J. M., Nichols R. J.andSchiffrin D. J., "Substrate structural effects on the synthesis and electrochemical properties of platinum nanoparticles on highly oriented pyrolytic graphite", The Journal of Physical Chemistry C, 2010, 114: 18439.
 
[8] Sharma S. et al., "Carboxyl group enhanced CO tolerant GO supported Pt catalysts: DFT and electrochemical analysis", Chemistry of Materials, 2014, 26: 6142.
 
[9] de la Fuente J. G. et al., "Functionalization of carbon support and its influence on the electrocatalytic behaviour of Pt/C in H2 and CO electrooxidation", Carbon, 2006, 44: 1919.
 
[10] Duarte M., Pilla A., Sieben J.andMayer C., "Platinum  particles electrodeposition on carbon substrates", Electrochemistry communications, 2006, 8: 159.
 
[11] Berenguer R., Marco-Lozar J. P., Quijada C., Cazorla-Amorós D.andMorallon E., "Effect of electrochemical treatments on the surface chemistry of activated carbon", Carbon, 2009, 47: 1018.
 
[12] Jabbari Z., Nassernejad B., Fallah N., Afsham N.andJavanbakhtb M., "Carbon monoxide and methanol oxidations on anodic and cathodic electrochemically treated carbon paper supported Pt, submitted",  2018.
 
[13] Afsham N., Fallah N., Nassernejad B., Jabbari Z.andJavanbakht M., "Temperature dependence study of CO desorption kinetic from Pt electrodeposited on carbon paper fuel cell electrode using a simple electrochemical method ", submitted, 2018.
 
[14] Schwenke K. U., Metzger M., Restle T., Piana M.andGasteiger H. A., "The influence of water and protons on Li2O2 crystal growth in aprotic Li-O2 cells", Journal of The Electrochemical Society, 2015, 162: A573.
 
[15] Yoon C.-M. et al., "Electrochemical surface oxidation of carbon nanofibers", Carbon, 2011, 49: 96.
 
[16] Coates J., "Interpretation of infrared spectra, a practical approach", Encyclopedia of analytical chemistry, 2000.
 
[17] Pitois A. et al., "Temperature dependence of CO desorption kinetics at a novel Pt-on-Au/C PEM fuel cell anode", Chemical Engineering Journal, 2010, 162: 314.
 
[18] Davies J.andTsotridis G., "Temperature-dependent kinetic study of CO desorption from Pt PEM fuel cell anodes", The Journal of Physical Chemistry C, 2008, 112: 3392.
 
[19] Pitois A., Davies J., Pilenga A., Pfrang A.andTsotridis G., "Kinetic study of CO desorption from PtRu/C PEM fuel cell anodes: Temperature dependence and associated microstructural transformations", Journal of Catalysis, 2009, 265: 199.