Electrochemical evaluation of electrodeposited platinum on a modified carbon substrate with cobalt, nickel and copper doped zinc oxide for the methanol oxidation reaction

Document Type : Research Paper

Authors

Fuel cell research laboratory, Department of Chemistry, Faculty of science, Shahid Rajaee Teacher Training University, Tehran, Iran

Abstract

Recently, methanol fuel cell systems have been attracted research activities by improving electrocatalysts to investigate facilitating the methanol oxidation reaction. ZnO and ZnO doped with other metals or metal oxide can be used as an additive in carbon substrate of an electrocatalyst to improve electro catalytic properties of a platinum electrocatalyst. In this work, a simple low temperature hydrothermal method has been used for synthesis of different morphologies of 1% mol Ni, Cu and Co doped ZnO nanostructures. The prepared nanostructures were used in carbon substrate of a platinum electrocatalyst on carbon paper. Then platinum was electrodeposited by simple cyclic voltammetry on a modified carbon substrate of electrocatalyst. Prepared electrodes were investigated for methanol oxidation reaction in a three electrode half-cell system by the electrochemical methods like as linear sweep voltammetry. The results revealed that with using Ni doped ZnO in carbon substrate, the current density was increased. While, with using Cu doped ZnO in carbon substrate, a significant reduction in anodic over voltage was observed.

Keywords

Main Subjects


[1] Neburchilov, V. Martin, J.   Wang, H. Zhang, J., " A review of Polymer Electrolyte Membranes for Direct Methanol Fuel Cells", J. Power Sources, 2006, 169: 221.
[2]    Kamarudin, S.K.,  Daud, W.R.W.,  Ho, S.L., Hasran, U.A. " Overview on the Challenges and Developments of MicroDirect Methanol Fuel Cells (DMFC)" , J. Power Sources, 2006, 163: 743.
[3] Antolini, E., "Formation of Carbon-Supported PtM Alloys for Low Temperature Fuel Cells: a Review", Mater. Chem. Phys., 2003, 78: 563.
[4] Guo, S.,  Dong, S.,  Wang, E. "Three-Dimensional Pt-on-Pd Bimetallic Nanodendrites Supported on GrapheneNanosheet: Facile Synthesis and Used as an Advanced Nanoelectrocatalyst for Methanol Oxidation", ACS Nano, 2010, 4: 547.
[5] Liu, Z., Shi, Q., Zhang, R., Wang, Q., Kang, G., Peng, F., "Phosphorus-Doped Carbon Nanotubes Supported Low Pt Loading Catalyst for the Oxygen Reduction Reaction in Acidic Fuel Cells", J. Power Sources, 2014, 268: 171.
[6] Zheng,  J.-S. , Tian, T. , Gao, Y., Wu, Q., Ma, J.-X., Zheng, J.-P., "Ultra-Low Pt Loading Catalytic Layer Nased on Buckypaper for Oxygen Reduction Reaction", Int. J. Hydrogen Energy, 2014, 39: 13816.
[7] Maier, W.D., Marsh,  J.S., Barnes, S.-J., Dodd, D.C., "The Distribution of Platinum Group Elements in the Insizwa Lobe, Mount Ayliff Complex, South Africa: Implications for Ni-Cu-PGE Sulfide Exploration in the Karoo Igneous Province", Econ. Geol., 2002, 97: 1239.
[8] Zhang,  Y., Zang, J., Jia,  S., Tian, P., Han, C., Wang, Y., "Low content of Pt supported on Ni-MoCx/carbon black as a highly durable and active electrocatalyst for methanol oxidation, oxygen reduction and hydrogen evolution reactions in acidic condition", App. Sur. Sci., 2017, 412: 327.
[9] Chen, X., Si, C., Gao, Y., Frenzel, J., Sun, J., Eggeler, G., Zhang, Z., “Multi-component nanoporous platinum– ruthenium–copper–osmium–iridium alloy with enhanced electrocatalytic activity towards methanol oxidation and oxygen reduction”, J. Power Sources, 2015, 273: 324.
[10]  Li, X.,  Wang, H., Yu, H.,  Liu, Z., Wang, H. , Peng, F., "Enhanced activity and durability of platinum anode catalyst by the modification of cobalt phosphide for direct methanol fuel cells", Electrochimica Acta, 2015, 185: 178.
[11] Hosseini, J.,  Abdolmaleki, M., Pouretedal, H. R.,  Keshavarz, M. H., "Electrocatalytic activity of porous nanostructured Fe/Pt-Fe electrode for methanol electrooxidation in alkaline media", Chin. J. Catal., 2015, 36: 1029.
[12] Chang, R., Zheng, L., Wang, C., Yang, D. ,Zhang, G., Sun, S., "Synthesis of hierarchical platinum-palladium-copper nanodendrites for efficient methanol oxidation", App.Catal. B: Env., 2017, 211: 205.
[13] Siller-Ceniceros, A.A., Sánchez-Castro, M.E.,Morales-Acosta,  D., Torres-Lubian,  J.R., Martínez, E., Rodríguez-Varela,  F.J., "Innovative functionalization of Vulcan XC-72 with Ru organometallic complex: Significant enhancement in catalytic activity of Pt/C electrocatalyst for the methanol oxidation reaction (MOR)", App. Catal B: Env. 2017, 209: 455.
[14] Cheng, Y., Shen, P. K., Jiang,  S. P., "Enhanced activity and stability of core–shell structured PtRuNix electrocatalysts for direct methanol fuel cells", Inter.l J. Hyd. Energ., 2016, 41:1935.
[15] Sharma, C.S., Sinha, A.S.K., Singh, R.N., "Use of graphene-supported manganite nano-composites for methanol electrooxidation", Inter. J Hyd. Energ., 2014, 39: 20151.
[16] Tran, S. B. T., Choi, H. S., Oh, S. Y., Moon, S. Y., Park, J. Y. "Iron-doped ZnO as a support for Pt-based catalysts to improve activity and stability: enhancement of metal–support interaction by the doping effect", RSC Adv., 2018, 8: 21528.
[17] Nischk, M., Mazierski, P., Wei, Z., Siuzdak, K., Kouame,  N. A., Kowalska, E., Remita, H., ZaleskaMedynsk, A., "Enhanced photocatalytic, electrochemical and photoelectrochemical properties of TiO2 nanotubes arrays modified with Cu, AgCu and Bi nanoparticles obtained via radiolytic reduction" , Applied Surface Science, 2016, 387:  89.
 [18] Takashima, T., Sano, T., Irie, H., "Improvement of the Photocatalytic Water Splitting Activity of SilverTantalate by Photodeposited Platinum and Cobalt-Oxide Nanoclusters", Electrochemistry, 2016, 84: 784.
[19] Ab Malek, S. N.,  Mohd, Y. "Effect of Deposition Potential on the Structure, Electrocatalytic Activity and Stability of Pt Films for Methanol Oxidation", Int. J. Electrochem. Sci., 2017, 12: 1561.