Hydrogen, Fuel Cell & Energy Storage

Author Index

A

Abbasalizadeh, Majid Thermodynamic evaluation of a novel geothermal and solar-driven multigeneration system for hydrogen and freshwater production [Volume 10, Issue 1, 2023, Pages 51-67]
Abdoli, Hamid Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
Abdullah, Shahrir Theoretical study of the effect of hydrogen addition to natural gas-fueled direct-injection engines [Volume 1, Issue 1, 2014, Pages 11-20]
Abdullah Mirzaie, Rasol Single walled carbon nanotube in the reaction layer of gas diffusion electrode for oxygen reduction reaction [Volume 1, Issue 2, 2014, Pages 75-82]
Abdullah Mirzaie, Rasol Effect of Solution Dielectric Constant on the Preparation of Gas Diffusion Electrode Reaction Layer for the Oxygen Reduction Reaction [Volume 10, Issue 2, 2023, Pages 97-109]
Abedini, Ebrahim The effect of solvent of titanium precursor in the sol-gel process on the activity of TiO2 nanoparticles for H2 production [Volume 4, Issue 2, 2017, Pages 139-151]
Abolfazli Esfahani, Javad An Experimental Investigation on Simultaneous Effects of Oxygen Ratio and Flow-Rate in SOFCs Performance Fueled by a Mixture of Methane and Oxygen [Volume 6, Issue 1, 2019, Pages 11-22]
Adimi, Samira Density Functional Studies on Crystal Structure and electronic properties of Potassium Alanate as a candidate for Hydrogen storage [Volume 2, Issue 3, 2015, Pages 169-179]
Afsham, Neda Kinetic study of CO desorption from cathodic electrochemically treated carbon paper supported Pt electrodes [Volume 4, Issue 3, 2017, Pages 201-207]
Afshar, Niloofar The effect of copper infiltration on LSM Cathode microstructure in high temperature solid oxide fuel cells [Volume 10, Issue 4, 2023, Pages 281-290]
Agaebrahimi, Mohammad Reza Performance assessment of a SOFC cogeneration system for residential buildings located in eastern Iran [Volume 3, Issue 2, 2016, Pages 81-97]
Aghaeinejad-Meybodi, Abbas Silica membrane performance for hydrogen separation from methanol steam reforming products: Assessment of different multistage membrane schemes [Volume 6, Issue 1, 2019, Pages 59-70]
Aghajani Delavar, Mojtaba Energy Management Simulation in a PEM Fuel Cell System [Volume 2, Issue 1, 2015, Pages 1-6]
Aghajani Delavar, Mojtaba Lattice Boltzmann Modeling of Methane Steam Reforming Reactions in Solid Oxide Fuel Cells [Volume 7, Issue 1, 2020, Pages 61-79]
Ahmadi Khatir, Farzad Numerical-experimental study on the thickness distribution of metallic bipolar plates for PEM fuel cells [Volume 9, Issue 1, 2022, Pages 1-18]
Ajamein, Hossein Effect of Sorbitol/Oxidizer Ratio on Microwave Assisted Solution Combustion Synthesis of Copper Based Nanocatalyst for Fuel Cell Grade Hydrogen Production [Volume 2, Issue 4, 2015, Pages 227-240]
Akbarian, Parisa Metal‐organic framework‐derived Cu@Co4N nanoparticles anchored on N-doped carbon nanotubes for efficient and stable ORR activity [Volume 10, Issue 4, 2023, Pages 327-337]
Akbarian, Parisa Chemical Kinetics analysis of a Zinc-Air Fuel Cell [(Articles in Press)]
AlaviSadr, Seyyed Mojtaba Synthesis, characterization and hydrogen storage properties of Mm(Ni,Co,Mn,Al)5 alloy [Volume 1, Issue 2, 2014, Pages 83-94]
Aliakbar Golkar, Masoud Hierarchical Control Strategy of Heat and Power for Zero Energy Buildings including Hybrid Fuel Cell/Photovoltaic Power Sources and Plug-in Electric Vehicle [Volume 3, Issue 1, 2016, Pages 33-44]
Alijanpour, Mohammad Energy Management Simulation in a PEM Fuel Cell System [Volume 2, Issue 1, 2015, Pages 1-6]
Alinoori, Amir Hosein Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
Alitabar, Hossein Simulation of integrated purification systems for hydrogen production in methanol steam reforming process [Volume 10, Issue 3, 2023, Pages 158-199]
Alizadeh, Ebrahim Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
Alizadeh, Ebrahim Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
Allahyari, Alireza Simulation of a Solid Oxide Fuel Cell with External Steam Methane Reforming and Bypass [Volume 4, Issue 2, 2017, Pages 103-118]
Amedi, Hamid Reza New Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell [Volume 2, Issue 4, 2015, Pages 241-252]
Ameri, Mehran Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
Amir, Elaheh Investigation of the catalytic performance and coke formation of nanocrystalline Ni/SrO-Al2O3 catalyst in dry reforming of methane [Volume 3, Issue 4, 2016, Pages 315-322]
Amirshaghaghi, Paria Hydrogen production by steam reforming of dimethyle ether over Cu/ZnO/Al2O3 and H-ZSM-5 catalysts: An experimental and modeling study [Volume 1, Issue 3, 2014, Pages 153-161]
Anaraki Firooz, Azam Electrochemical evaluation of electrodeposited platinum on a modified carbon substrate with cobalt, nickel and copper doped zinc oxide for the methanol oxidation reaction [Volume 5, Issue 1, 2018, Pages 49-55]
Arabi, Hadi "Physical properties and electronic structure of LaNi5 compound before and after hydrogenation: An experimental and theoretical approach" [Volume 1, Issue 1, 2014, Pages 27-39]
Arabi, Hadi Synthesis, characterization and hydrogen storage properties of Mm(Ni,Co,Mn,Al)5 alloy [Volume 1, Issue 2, 2014, Pages 83-94]
Arabi, Hadi Density Functional Studies on Crystal Structure and electronic properties of Potassium Alanate as a candidate for Hydrogen storage [Volume 2, Issue 3, 2015, Pages 169-179]
Arabi, Hadi Study the stability of Si, Ge, Fe and Co in the interior surface of metallic carbon nanotube for hydrogen storage [Volume 2, Issue 3, 2015, Pages 197-205]
Ariyanfar, Leyli A Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System [Volume 1, Issue 4, 2014, Pages 223-231]
Arjomandbigdeli, Tara Synthesis and characterization of Ag-Y co-doped Mn-Co spinel for solid oxide fuel cell application [Volume 8, Issue 1, 2021, Pages 43-49]
Asadi, Samane In situ activation of a Ni catalyst with Mo ion for hydrogen evolution reaction in alkaline solution [Volume 3, Issue 2, 2016, Pages 151-158]
Asadi, Samane Kinetics study of hydrogen evolution reaction on a high porous three dimensional NiPC alloy [Volume 8, Issue 2, 2021, Pages 95-101]
Asghari, Saeed Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
Ataie, Abolghasem La0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study [Volume 1, Issue 4, 2014, Pages 239-246]
Azami, S. M. Lithium-oxygen charge transfer interaction: a deformation density analysis study [(Articles in Press)]
Azari, Khaled Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
Azizi, Saba Investigation of ion transport and water content properties in anion exchange membranes based on polysulfone for solid alkaline fuel cell application [Volume 2, Issue 1, 2015, Pages 13-25]

B

Babaei, Alireza La0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study [Volume 1, Issue 4, 2014, Pages 239-246]
Babaei, Alireza Nickel oxide-gadolinium doped ceria synthesized by new methods as anodes material for solid oxide fuel cells [Volume 9, Issue 2, 2022, Pages 133-147]
Babaluo, Ali Akbar Effect of Dehydration Temperature on the H2 Separation Potential of Hydroxy Sodalite Zeolite Membranes [Volume 1, Issue 4, 2014, Pages 209-214]
Babaluo, Ali Akbar Preparation of Pd composite membrane via organic-inorganic activation method in electroless plating technique [Volume 2, Issue 3, 2015, Pages 151-158]
Babaluo, Ali Akbar Palladium composite membrane with high reversibility of CO2 poisoning [Volume 5, Issue 1, 2018, Pages 13-19]
Babaluo, Ali Akbar Nanostructured Palladium-Doped Silica Membrane Layer Synthesis for Hydrogen Separation: Effect of Activated Sublayers [Volume 6, Issue 1, 2019, Pages 1-9]
Babaluo*, Ali Akbar Modeling and simulation of the fluid dynamic and performance of the Pd-based membrane by CFD for hydrogen separation [Volume 9, Issue 1, 2022, Pages 19-25]
Badrnezhad, Ramin Kinetics study of hydrogen evolution reaction on a high porous three dimensional NiPC alloy [Volume 8, Issue 2, 2021, Pages 95-101]
Bagheri, Ahmad Preparation and Characterization of Electrocatalyst Nanoparticles for Direct Methanol Fuel Cell Applications Using β-D-glucose as Protection Agent [Volume 4, Issue 1, 2017, Pages 1-11]
Bagherian Farahabadi, Hossein High Step-Up Converter with Low Voltage Stress for Fuel Cell Applications [Volume 9, Issue 2, 2022, Pages 117-132]
Bagherian Farahabadi, Hossein Experimental Investigation of a High Efficiency Power Path Controller for PEM Fuel Cell and Battery Hybrid System [Volume 9, Issue 2, 2022, Pages 149-161]
Bagherian Farahabadi, Hossein Fuel Cell Power System Conceptual Design for Unmanned Underwater Vehicle [Volume 10, Issue 1, 2023, Pages 33-50]
Bagherian Farahabadi, Hossein Assessment of a novel photovoltaic-electrolyzer-fuel cell-ORC hybrid energy system for hydrogen and power production [Volume 10, Issue 2, 2023, Pages 111-130]
Baheri, Sima The effect of inclined radial flow in proton exchange membrane fuel cells performance [Volume 1, Issue 3, 2014, Pages 141-152]
Baheri Islami, Sima The effect of vertical injection of reactants to the membrane electrode assembly on the performance of a PEM fuel cell [Volume 3, Issue 3, 2016, Pages 167-182]
Baheri Islami, Sima The effect of increasing the multiplicity of flow fields contact surface on the performance of PEM fuel cell [Volume 4, Issue 1, 2017, Pages 69-83]
Bahri Rasht Abadi, Mohammad Mahdi How to Design a Cryogenic Joule-Thomson Cooling System: Case Study of Small Hydrogen Liquefier [Volume 3, Issue 2, 2016, Pages 113-125]
Bahri Rasht Abadi, Mohammad Mahdi Influence of unsuitable operational conditions on the transient performance of a small hydrogen liquefier [Volume 3, Issue 3, 2016, Pages 199-212]
Bakhshi, Atieh Implementation of Chitosan modified ultrafiltration hollow fiber as proton exchange membrane of ml-scale microbial fuel cells [Volume 10, Issue 4, 2023, Pages 299-310]
Bakhtiari, Maliheh Electrochemical evaluation of electrodeposited platinum on a modified carbon substrate with cobalt, nickel and copper doped zinc oxide for the methanol oxidation reaction [Volume 5, Issue 1, 2018, Pages 49-55]
Barzegari, mohammad Experimental study and numerical modeling of vibrational characteristics of a 500W PEM fuel cell stack [Volume 9, Issue 1, 2022, Pages 39-52]
Barzegari, Mohammad Mahdi Developed endplate geometry for uniform contact pressure distribution over PEMFC active area [Volume 7, Issue 1, 2020, Pages 1-12]
Barzegari, Mohammad Mahdi Design and Analysis of an Innovative Dead-end Cascade-type PEMFC Stack at Different Orientations [Volume 7, Issue 1, 2020, Pages 81-96]
Barzegari, Mohammad Mahdi Experimental Analysis of Fiber Laminating Effects on Flexural Rigidity of Composite Endplates for Use in PEM Fuel Cells [Volume 9, Issue 2, 2022, Pages 97-106]
Barzegari, Mohammad Mahdi Numerical-experimental study on the Failure Behavior of Graphite-Based Composite Bipolar Plate for PEM fuel cells [Volume 9, Issue 2, 2022, Pages 107-116]
Barzegari, Mohammad Mahdi Mechanical and chemical characteristics of the PEM fuel cell sealants in simulated environment [Volume 9, Issue 2, 2022, Pages 163-178]
Barzegari, Mohammad Mahdi Study of the forming process effects on the wrinkling and thinning percentage of the micro-channels with serpentine layout [Volume 10, Issue 1, 2023, Pages 81-93]
Barzegari, Mohammad Mahdi Study of Contact Pressure Distribution over MEA of the Three-Cell PEMFC with Metallic Bipolar Plates [Volume 10, Issue 1, 2023, Pages 69-79]
Barzegari*, Mohammad Mahdi Numerical-experimental study on the thickness distribution of metallic bipolar plates for PEM fuel cells [Volume 9, Issue 1, 2022, Pages 1-18]
Barzgari, Mahboobeh A two-phase, non-isothermal model for water management in the cathode gas diffusion layer of polymer electrolyte membrane fuel cells [Volume 10, Issue 3, 2023, Pages 215-231]
Basafa, Elahe Performance verification of a laboratory scale hydrogen/oxygen combustion chamber [Volume 9, Issue 1, 2022, Pages 27-38]
Basile, Angelo Silica membrane performance for hydrogen separation from methanol steam reforming products: Assessment of different multistage membrane schemes [Volume 6, Issue 1, 2019, Pages 59-70]
Bazooyar, Bahamin New Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell [Volume 2, Issue 4, 2015, Pages 241-252]
Behbahani, Amin Hydrothermal synthesis of nano-size zirconia using commercial zirconia powder: process optimization through response surface methodology [Volume 1, Issue 3, 2014, Pages 163-173]
Behjatmanesh Ardakani, Reza Evaluation of electrocatalytic performance of PtCo/C nanoparticles in different proportions of cobalt for oxygen reduction reaction [Volume 10, Issue 4, 2023, Pages 291-297]
Beydaghi, Hossein Novel PVA/La2Ce2O7 hybrid nanocomposite membranes for application in proton exchange membrane fuel cells [Volume 1, Issue 2, 2014, Pages 105-112]
Beydaghi, Hossein Preparation and Characterization of Electrocatalyst Nanoparticles for Direct Methanol Fuel Cell Applications Using β-D-glucose as Protection Agent [Volume 4, Issue 1, 2017, Pages 1-11]
Bozorgmehri, Shahriar Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
Bozorgmehri, Shahriar An Experimental Investigation on Simultaneous Effects of Oxygen Ratio and Flow-Rate in SOFCs Performance Fueled by a Mixture of Methane and Oxygen [Volume 6, Issue 1, 2019, Pages 11-22]
Bozorgmehri, Shahriar Lattice Boltzmann Modeling of Methane Steam Reforming Reactions in Solid Oxide Fuel Cells [Volume 7, Issue 1, 2020, Pages 61-79]

C

COLPAN, CAN OZGUR Numerical investigation of methanol crossover through the membrane in a direct methanol fuel cell [Volume 5, Issue 1, 2018, Pages 21-33]

D

Dadashi Firouzjaei, Kamran Experimental Study of Oxidant Effect on Lifetime of PEM Fuel Cell [Volume 7, Issue 1, 2020, Pages 33-43]
Daneshtalab, Reza A high performance lithium-ion battery using LiNa0.02K0.01FePO4/C as cathode material and anatase TiO2 nanotube arrays as anode material [Volume 4, Issue 1, 2017, Pages 27-35]
Darabi, Zeinab Modeling and simulation of the fluid dynamic and performance of the Pd-based membrane by CFD for hydrogen separation [Volume 9, Issue 1, 2022, Pages 19-25]
Dashtizad, valiollah Synthesis Zr-Co-Y based chemical getter and evaluation its vacuum preserving, sorption characteristics, and hydrogen absorption [Volume 6, Issue 2, 2019, Pages 171-184]
Delshad, Majid Analysis and implementation of high step-up SEPIC converter without coupled inductor for high voltage applications [Volume 10, Issue 3, 2023, Pages 201-213]
Domairry Ganji, Davood Lattice Boltzmann Modeling of Methane Steam Reforming Reactions in Solid Oxide Fuel Cells [Volume 7, Issue 1, 2020, Pages 61-79]

E

Ebrahimi, Atiyeh Effect of batch vs. continuous mode of operation on microbial desalination cell performance treating municipal wastewater [Volume 3, Issue 4, 2016, Pages 281-290]
Ebrahimpour, Reza Modeling of measurement error in refractive index determination of fuel cell using neural network and genetic algorithm [Volume 1, Issue 2, 2014, Pages 95-104]
Eikani, Mohammad Hasan Enhancing the CO tolerance of Pt/C as PEM fuel cell anode catalyst by modifying the catalyst synthesis method [Volume 6, Issue 1, 2019, Pages 71-81]
Eikani *, Mohammad H. Three-dimensional modeling of transport phenomena in a planar anode-supported solid oxide fuel cell [Volume 4, Issue 1, 2017, Pages 37-52]
Elhami, Mohammad-Reza Numerical analysis of reactant transport in the novel tubular polymer electrolyte membrane fuel cells [Volume 2, Issue 3, 2015, Pages 181-196]
Eliassi, Ali Hydrogen production by steam reforming of dimethyle ether over Cu/ZnO/Al2O3 and H-ZSM-5 catalysts: An experimental and modeling study [Volume 1, Issue 3, 2014, Pages 153-161]
Emami, Leyla Numerical-experimental study on the Failure Behavior of Graphite-Based Composite Bipolar Plate for PEM fuel cells [Volume 9, Issue 2, 2022, Pages 107-116]
Emamifar, Armin Performance assessment of a power/refrigeration cogeneration system driven by the waste heat of a solid oxide fuel cell [Volume 10, Issue 3, 2023, Pages 241-256]
Emamifar*, Armin Thermodynamic and exergoeconomic evaluation of waste heat recovery for hydrogen production in a CCHP system [Volume 9, Issue 1, 2022, Pages 53-68]
Enhessari, Morteza Novel PVA/La2Ce2O7 hybrid nanocomposite membranes for application in proton exchange membrane fuel cells [Volume 1, Issue 2, 2014, Pages 105-112]
Esfandeh, Somayeh Modeling of measurement error in refractive index determination of fuel cell using neural network and genetic algorithm [Volume 1, Issue 2, 2014, Pages 95-104]
Eshghi, Abolfath Electrodeposition of platinum nanoparticles on reduced graphene oxide as an efficient catalyst for oxygen reduction reaction [Volume 2, Issue 1, 2015, Pages 7-12]
Eshghi, Abolfath Palladium nanoparticles supported on carbon black powder as an effective anodic catalyst for application in a direct glucose alkaline fuel cell [Volume 3, Issue 1, 2016, Pages 11-17]
Eskandarijam, Jafar Numerical-experimental study on the Failure Behavior of Graphite-Based Composite Bipolar Plate for PEM fuel cells [Volume 9, Issue 2, 2022, Pages 107-116]
Esmaeilifar, Ashkan Hydrothermal synthesis of nano-size zirconia using commercial zirconia powder: process optimization through response surface methodology [Volume 1, Issue 3, 2014, Pages 163-173]
Esmailian, Mohammad The Effect of Pre- Stretching Treatment on the Microstructure, Mechanical Properties and Corrosion Resistance of 7075 Aluminum Alloy used in PEMFC [Volume 10, Issue 3, 2023, Pages 233-239]

F

Fallah, Narges Kinetic study of CO desorption from cathodic electrochemically treated carbon paper supported Pt electrodes [Volume 4, Issue 3, 2017, Pages 201-207]
Fani, Bahador Analysis and implementation of high step-up SEPIC converter without coupled inductor for high voltage applications [Volume 10, Issue 3, 2023, Pages 201-213]
Farhadi, Mousa Energy Management Simulation in a PEM Fuel Cell System [Volume 2, Issue 1, 2015, Pages 1-6]
Farhadian, Nafiseh Prediction the hydrogen adsorption isotherm on nickel decorated carbon nanotubes by applying artificial neural network modeling [Volume 8, Issue 2, 2021, Pages 61-68]
FARNAK, MOSTAFA An Experimental Investigation on Simultaneous Effects of Oxygen Ratio and Flow-Rate in SOFCs Performance Fueled by a Mixture of Methane and Oxygen [Volume 6, Issue 1, 2019, Pages 11-22]
Farzad, Mohammad Ali Performance assessment of a SOFC cogeneration system for residential buildings located in eastern Iran [Volume 3, Issue 2, 2016, Pages 81-97]
Farzaneh, Farshid Iranian hydrogen production insight: research trends and outlook [Volume 8, Issue 1, 2021, Pages 23-33]
Fathi, Hossein The Impact of Wettability on Effective Properties of Cathode Catalyst Layer in a Proton Exchange Membrane Fuel Cell [Volume 3, Issue 3, 2016, Pages 233-245]
Fathollahi Zonouz, Abolfazl Effect of temperature on kinetics of the hydrogen evolution reaction on Ni-P-C cathodes in alkaline solution [Volume 1, Issue 4, 2014, Pages 215-222]
Fattahzadeh, Mehrdad Synthesis Zr-Co-Y based chemical getter and evaluation its vacuum preserving, sorption characteristics, and hydrogen absorption [Volume 6, Issue 2, 2019, Pages 171-184]
Fili, Mohammad Hossein Modeling and experimental study on the sealing gasket of proton exchange membrane fuel cells [Volume 3, Issue 3, 2016, Pages 213-220]

G

Ganjali, Mohammad Reza Facile Synthesis of N, S-Doped Graphene from Sulfur Trioxide Pyridine Precursor for the Oxygen Reduction Reaction [Volume 4, Issue 3, 2017, Pages 231-240]
Gashoul, Fatemeh Studies on the SPEEK membrane with low degree of sulfonation as a stable proton exchange membrane for fuel cell applications [Volume 3, Issue 3, 2016, Pages 221-232]
Ghadamian, Hossein A Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System [Volume 1, Issue 4, 2014, Pages 223-231]
Ghadamian, Hossein Energy Price Analysis of a Biomass Gasification-Solid Oxide Fuel Cell-Gas Turbine Power Plant [Volume 3, Issue 1, 2016, Pages 45-58]
Ghaderi, Serveh Ni@Pt core-shell nanoparticles as an improved electrocatalyst for ethanol electrooxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 109-119]
Ghaderi, Serveh Ethanol electrooxidation on the Co@Pt core-shell nanoparticles modified carbon-ceramic electrode in acidic and alkaline media [Volume 3, Issue 1, 2016, Pages 19-31]
Ghadimi, Mojtaba Developed endplate geometry for uniform contact pressure distribution over PEMFC active area [Volume 7, Issue 1, 2020, Pages 1-12]
Ghafarian-Zahmatkesh, Hossein Preparation and Characterization of Electrocatalyst Nanoparticles for Direct Methanol Fuel Cell Applications Using β-D-glucose as Protection Agent [Volume 4, Issue 1, 2017, Pages 1-11]
Ghaffari, M.D. Sulfurous Analysis of Bioelectricity Generation from Sulfate-reducing Bacteria (SRB) in a Microbial Fuel Cell [Volume 4, Issue 4, 2017, Pages 307-321]
Ghafouri Roozbahani, Mohammad Ali Hydrogen production via steam reforming of LPG on Ni/Zeolite catalysts [Volume 1, Issue 4, 2014, Pages 233-238]
Ghafouri Roozbahani, Mohammad Ali Methanol steam reforming; Effects of various metal oxides on the properties of a Cu-based catalyst [Volume 3, Issue 4, 2016, Pages 291-299]
Ghamari Arbati, Somayeh Preparation, characterization and the study of electrochemical behavior of Y-doped Bariumcerate powders by new precursors [Volume 10, Issue 1, 2023, Pages 1-10]
Ghamari Arbati, Somayeh Nickel oxide-gadolinium doped ceria synthesized by new methods as anodes material for solid oxide fuel cells [Volume 9, Issue 2, 2022, Pages 133-147]
Ghanbarian, Asrin Performance Improvement of PEM Fuel Cells Using Air Channel Indentation; Part I: Mechanisms to Enrich Oxygen Concentration in Catalyst Layer [Volume 1, Issue 4, 2014, Pages 199-207]
Ghanbarian, Asrin Generalization of a CFD Model to Predict the Net Power in PEM Fuel Cells [Volume 6, Issue 1, 2019, Pages 23-37]
Ghanbarlou, Hosna Preparation of Nitrogen-Doped Graphene By Solvothermal Process as Supporting Material for Fuel Cell Catalysts [Volume 1, Issue 2, 2014, Pages 113-119]
Ghani Harzand, Ayda Synthesis and electrochemical properties of Sr3Fe1.8Co0.2O7 as a solid oxide fuel cell cathode [Volume 8, Issue 1, 2021, Pages 51-58]
Gharibi, Hussein Determination of thermodynamic parameters of hydrogen permeation of palladium membrane for considering the effect of stainless steel support [Volume 1, Issue 1, 2014, Pages 1-10]
Gharibi, Hussein One –step synthesis of PdCo alloy nanoparticles decorated on reduced grahene oxide as an Electro-catalyst for Oxygen Reduction Reaction in Passive Direct Methanol Fuel Cells [Volume 2, Issue 1, 2015, Pages 27-33]
Gharibi, Hussein Effect of Solution Dielectric Constant on the Preparation of Gas Diffusion Electrode Reaction Layer for the Oxygen Reduction Reaction [Volume 10, Issue 2, 2023, Pages 97-109]
Ghasemi Tamami, Peyman Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior [Volume 3, Issue 1, 2016, Pages 1-10]
Ghasemi Tamami, Peyman Modeling and experimental study on the sealing gasket of proton exchange membrane fuel cells [Volume 3, Issue 3, 2016, Pages 213-220]
Ghasemi Tamami, Peyman Design and Investigation of Honeycomb End Plates for PEM Fuel Cells [Volume 4, Issue 3, 2017, Pages 189-199]
Ghasemzadeh, Kamran Silica membrane performance for hydrogen separation from methanol steam reforming products: Assessment of different multistage membrane schemes [Volume 6, Issue 1, 2019, Pages 59-70]
Ghiasi, Mohammad Iman Hierarchical Control Strategy of Heat and Power for Zero Energy Buildings including Hybrid Fuel Cell/Photovoltaic Power Sources and Plug-in Electric Vehicle [Volume 3, Issue 1, 2016, Pages 33-44]
Gholamian, Ehsan Comparison of waste heat recovery from a Proton Exchange Membrane fuel cell by gas turbine or Organic Rankin Cycle: a display of 3E analysis [Volume 8, Issue 2, 2021, Pages 103-112]
Gholaminezad, Iman Synthesis and investigation on microstructure and electrical conductivity of Ruddlesden-Popper phase, La1.9Sr0.1Ni0.7Cu0.3O4 (LSNC), as cathode material for intermediate temperature solid oxide fuel cells [Volume 8, Issue 2, 2021, Pages 69-76]
Gholizade Atani, Ahmad Nanostructured Palladium-Doped Silica Membrane Layer Synthesis for Hydrogen Separation: Effect of Activated Sublayers [Volume 6, Issue 1, 2019, Pages 1-9]
Gholy Nejad, Puriya Mohamad Numerical study on the performance prediction of a proton exchange membrane (PEM) fuel cell [Volume 4, Issue 4, 2017, Pages 249-263]
Ghorbani, Shaban Reza Density Functional Studies on Crystal Structure and electronic properties of Potassium Alanate as a candidate for Hydrogen storage [Volume 2, Issue 3, 2015, Pages 169-179]
Golkar, Masoud Optimal Intelligent Control of Plug-in Fuel Cell Electric Vehicles in Smart Electric Grids [Volume 1, Issue 1, 2014, Pages 55-64]
Golkar, Seyed Hadi Modeling and Optimization of non - isothermal two- phase flow in the cathode gas diffusion layer of PEM fuel cell [Volume 2, Issue 3, 2015, Pages 159-168]
Golmohammad, Mohammad Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
Golmohammad, Mohammad Iranian hydrogen production insight: research trends and outlook [Volume 8, Issue 1, 2021, Pages 23-33]
Golmohammad, Mohammad Synthesis and characterization of nanostructured Cux (Mn1.5-x/2Co1.5-x/2)O4 as an interconnect coating for solid oxide fuel cell [Volume 8, Issue 1, 2021, Pages 35-41]
Golmohammad, Mohammad Synthesis and electrochemical properties of Sr3Fe1.8Co0.2O7 as a solid oxide fuel cell cathode [Volume 8, Issue 1, 2021, Pages 51-58]
Golmohammad**, Mohammad Synthesis and characterization of Ag-Y co-doped Mn-Co spinel for solid oxide fuel cell application [Volume 8, Issue 1, 2021, Pages 43-49]
Golzari, Alireza New Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell [Volume 2, Issue 4, 2015, Pages 241-252]

H

Habibi, Biuck Ni@Pt core-shell nanoparticles as an improved electrocatalyst for ethanol electrooxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 109-119]
Habibnia, Mostafa Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior [Volume 3, Issue 1, 2016, Pages 1-10]
Habibnia, Mostafa Modeling and experimental study on the sealing gasket of proton exchange membrane fuel cells [Volume 3, Issue 3, 2016, Pages 213-220]
Habibnia, Mostafa Design and Investigation of Honeycomb End Plates for PEM Fuel Cells [Volume 4, Issue 3, 2017, Pages 189-199]
Habibnia, Mostafa Developed endplate geometry for uniform contact pressure distribution over PEMFC active area [Volume 7, Issue 1, 2020, Pages 1-12]
Habibpour, Razeih Interaction of atomic hydrogen with monometallic Au(100), Cu(100), Pt(100) surfaces and surface of bimetallic Au@Cu(100), Au@Pt(100) overlayer systems: The role of magnetism [Volume 4, Issue 3, 2017, Pages 209-218]
Habibzadeh, Amin Thermodynamic evaluation of a novel geothermal and solar-driven multigeneration system for hydrogen and freshwater production [Volume 10, Issue 1, 2023, Pages 51-67]
Haghighi, Mohammad Effect of Sorbitol/Oxidizer Ratio on Microwave Assisted Solution Combustion Synthesis of Copper Based Nanocatalyst for Fuel Cell Grade Hydrogen Production [Volume 2, Issue 4, 2015, Pages 227-240]
Haghigi, Mohmmad Preparation of Pd composite membrane via organic-inorganic activation method in electroless plating technique [Volume 2, Issue 3, 2015, Pages 151-158]
Hajizadeh, Amin Optimal Intelligent Control of Plug-in Fuel Cell Electric Vehicles in Smart Electric Grids [Volume 1, Issue 1, 2014, Pages 55-64]
Hajizadeh, Amin Hierarchical Control Strategy of Heat and Power for Zero Energy Buildings including Hybrid Fuel Cell/Photovoltaic Power Sources and Plug-in Electric Vehicle [Volume 3, Issue 1, 2016, Pages 33-44]
Hassani, Mojtaba Experimental Study of Oxidant Effect on Lifetime of PEM Fuel Cell [Volume 7, Issue 1, 2020, Pages 33-43]
Hassaninejad-Darzi, Seyed Karim Electrocatalytic oxidation of glucose on the modified carbon paste electrode with sodalite nanozeolite for fuel cell [Volume 2, Issue 1, 2015, Pages 47-58]
Hassanzadeh, Hasan A two-phase, non-isothermal model for water management in the cathode gas diffusion layer of polymer electrolyte membrane fuel cells [Volume 10, Issue 3, 2023, Pages 215-231]
Hassanzadeh, Hassan Modeling heat and mass transfer in laminar forced flow between parallel plates channel imposed to suction or injection [Volume 2, Issue 1, 2015, Pages 35-46]
Hassanzadeh, Hassan Modeling and Optimization of non - isothermal two- phase flow in the cathode gas diffusion layer of PEM fuel cell [Volume 2, Issue 3, 2015, Pages 159-168]
Hassanzadeh, Hassan Performance assessment of a SOFC cogeneration system for residential buildings located in eastern Iran [Volume 3, Issue 2, 2016, Pages 81-97]
Hassanzadeh, Hassan Effect of CO in the reformatted fuel on the performance of Polymer Electrolyte Membrane (PEM) fuel cell [Volume 4, Issue 2, 2017, Pages 153-165]
Hassanzadeh, Hassan Lattice Boltzmann simulation of water transfer in gas diffusion layers with porosity gradient of polymer electrolyte membrane fuel cells with parallel processing on GPU [Volume 7, Issue 1, 2020, Pages 45-60]
Hassanzadeh, Hassan Modeling of mass transfer in a T-shaped microfluidic fuel cell [Volume 10, Issue 2, 2023, Pages 147-156]
HAZZAB, Abdaldjabar Development and Simulation of a PEM Fuel Cell model for Prediction of Water Content and Power Generation [Volume 4, Issue 4, 2017, Pages 289-299]
Hedayati, Ali Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
Heydaran-Daroogheh-Amnyieh, Zahra Analysis and implementation of high step-up SEPIC converter without coupled inductor for high voltage applications [Volume 10, Issue 3, 2023, Pages 201-213]
Hooshyari, Khadijeh Novel PVA/La2Ce2O7 hybrid nanocomposite membranes for application in proton exchange membrane fuel cells [Volume 1, Issue 2, 2014, Pages 105-112]
Hooshyari, Khadijeh Preparation and Characterization of Electrocatalyst Nanoparticles for Direct Methanol Fuel Cell Applications Using β-D-glucose as Protection Agent [Volume 4, Issue 1, 2017, Pages 1-11]
Hormozi, Faramarz Reforming Integrated with Oxidation in Micro-Heat Exchanger Reactor with Circular Micro-Channels [Volume 1, Issue 2, 2014, Pages 65-74]
Hoshyar, Najmeh Optimization of Preparation Factors for Cerium Oxide Synthesis as a Support for CO PrOx Catalyst [Volume 1, Issue 3, 2014, Pages 189-197]
Hoshyar, Najmeh Effect of platinum on Ceria supported Cu catalysts for PrOx process in fuel processors [Volume 1, Issue 1, 2014, Pages 1-100]
Hossainpour, Siamak The effect of vertical injection of reactants to the membrane electrode assembly on the performance of a PEM fuel cell [Volume 3, Issue 3, 2016, Pages 167-182]
Hossainpour, Siamak The effect of increasing the multiplicity of flow fields contact surface on the performance of PEM fuel cell [Volume 4, Issue 1, 2017, Pages 69-83]
Hosseini, S.Vahid Study the stability of Si, Ge, Fe and Co in the interior surface of metallic carbon nanotube for hydrogen storage [Volume 2, Issue 3, 2015, Pages 197-205]

I

Imanlou, Sanaz Synthesis and investigation on microstructure and electrical conductivity of Ruddlesden-Popper phase, La1.9Sr0.1Ni0.7Cu0.3O4 (LSNC), as cathode material for intermediate temperature solid oxide fuel cells [Volume 8, Issue 2, 2021, Pages 69-76]
Imanzadeh, Hamideh Platinum nanoparticles/functionalized carbon nanoparticles composites supported on the carbon-ceramic electrode and their electroactivity for ethanol oxidation [Volume 5, Issue 1, 2018, Pages 35-47]
Irankhah, Abdullah Optimization of Preparation Factors for Cerium Oxide Synthesis as a Support for CO PrOx Catalyst [Volume 1, Issue 3, 2014, Pages 189-197]
Irankhah, Abdullah Effect of platinum on Ceria supported Cu catalysts for PrOx process in fuel processors [Volume 1, Issue 1, 2014, Pages 1-100]
Iranmanesh, Masoud Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
Iravaninia, Mona Investigation of ion transport and water content properties in anion exchange membranes based on polysulfone for solid alkaline fuel cell application [Volume 2, Issue 1, 2015, Pages 13-25]
Isapour, Zahra Synthesis and characterization of Ag-Y co-doped Mn-Co spinel for solid oxide fuel cell application [Volume 8, Issue 1, 2021, Pages 43-49]

J

Jabbari, Amin Additive Manufactured Parts Specifications and Applications in Catalytic Substrates and Fuel Cells [Volume 10, Issue 2, 2023, Pages 173-181]
Jabbari, Zeinab Kinetic study of CO desorption from cathodic electrochemically treated carbon paper supported Pt electrodes [Volume 4, Issue 3, 2017, Pages 201-207]
Jahanshahi Javaran, Ebrahim Lattice Boltzmann simulation of water transfer in gas diffusion layers with porosity gradient of polymer electrolyte membrane fuel cells with parallel processing on GPU [Volume 7, Issue 1, 2020, Pages 45-60]
Jahantigh, nabi Parametric study of the influence of cooling channel dimensions on PEM fuel cell thermal performance [Volume 4, Issue 4, 2017, Pages 265-274]
Jamali Ghahderijani, Mehdi Investigation of vessels pressure effect on PEM electrolyzer performance by using a new OneDimensional Dynamic Model [Volume 2, Issue 4, 2015, Pages 271-281]
Jamshidi, Sona Preparation of Pd composite membrane via organic-inorganic activation method in electroless plating technique [Volume 2, Issue 3, 2015, Pages 151-158]
Jamshidi, Sona Palladium composite membrane with high reversibility of CO2 poisoning [Volume 5, Issue 1, 2018, Pages 13-19]
Javaheri, Masoumeh Using the Palladium as core and Platinum as shell for ORR [Volume 1, Issue 3, 2014, Pages 133-139]
Javanbakht, Mehram Electrochemical Study of Hydrogen Adsorption/Reduction (HAR) Reaction on Graphene Oxide as Electrocatalyst for Proton Exchange Membrane Fuel Cells [Volume 2, Issue 2, 2015, Pages 99-107]
Javanbakht, Mehran Novel PVA/La2Ce2O7 hybrid nanocomposite membranes for application in proton exchange membrane fuel cells [Volume 1, Issue 2, 2014, Pages 105-112]
Javanbakht, Mehran Synthesis of Supported Pt Alloy three Dimensional Rhombus Shapes Nanoparticles for Oxygen Reduction Reaction [Volume 2, Issue 2, 2015, Pages 121-130]
Javanbakht, Mehran Preparation and Characterization of Electrocatalyst Nanoparticles for Direct Methanol Fuel Cell Applications Using β-D-glucose as Protection Agent [Volume 4, Issue 1, 2017, Pages 1-11]
Javanbakht, Mehran Kinetic study of CO desorption from cathodic electrochemically treated carbon paper supported Pt electrodes [Volume 4, Issue 3, 2017, Pages 201-207]
Jelveh, Hussein Reforming Integrated with Oxidation in Micro-Heat Exchanger Reactor with Circular Micro-Channels [Volume 1, Issue 2, 2014, Pages 65-74]
Jomekian, Abolfazl New Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell [Volume 2, Issue 4, 2015, Pages 241-252]

K

Kadier, Abudukeremu The significance of key operational variables to the enhancement of hydrogen production in a single-chamber microbial electrolysis cell (MEC) [Volume 2, Issue 2, 2015, Pages 85-97]
Kaflou, Ali Morphological and physical study of Cu-Ni sintered porous wicks used in heat pipes and fuel cells [Volume 3, Issue 4, 2016, Pages 255-266]
Kaflou, Ali Synthesis Zr-Co-Y based chemical getter and evaluation its vacuum preserving, sorption characteristics, and hydrogen absorption [Volume 6, Issue 2, 2019, Pages 171-184]
Kakaei, Karim One –step synthesis of PdCo alloy nanoparticles decorated on reduced grahene oxide as an Electro-catalyst for Oxygen Reduction Reaction in Passive Direct Methanol Fuel Cells [Volume 2, Issue 1, 2015, Pages 27-33]
Kalil, Mohd Sahaid The significance of key operational variables to the enhancement of hydrogen production in a single-chamber microbial electrolysis cell (MEC) [Volume 2, Issue 2, 2015, Pages 85-97]
Kamvar, Majid Comparative Numerical Study of Co- and Counter-Flow Configurations of an All-Porous Solid Oxide Fuel Cell [Volume 8, Issue 2, 2021, Pages 77-93]
Kamvar, Majid Numerical Investigation of a Hydrogen-fuelled Planar AP-SOFC Performance with Special Focus on Safe Operation [Volume 8, Issue 2, 2021, Pages 113-125]
Karami, Zohreh Numerical study on the performance prediction of a proton exchange membrane (PEM) fuel cell [Volume 4, Issue 4, 2017, Pages 249-263]
Karimi, Aida Dynamic investigation of hydrocarbon proton exchange membrane Fuel Cell [Volume 4, Issue 3, 2017, Pages 219-230]
Karimi Alavijeh, Masih Modeling of Multi-population Microbial Fuel and Electrolysis Cells Based on the Bioanode Potential Conditions [Volume 1, Issue 4, 2014, Pages 247-260]
Karkeabadi, Reza Hydrogen production via steam reforming of LPG on Ni/Zeolite catalysts [Volume 1, Issue 4, 2014, Pages 233-238]
Kashi, Eslam Interaction of atomic hydrogen with monometallic Au(100), Cu(100), Pt(100) surfaces and surface of bimetallic Au@Cu(100), Au@Pt(100) overlayer systems: The role of magnetism [Volume 4, Issue 3, 2017, Pages 209-218]
Kazemi, Mohammad Hesein Extremely Fast Simulation of the Li--Ion Batteries Governing Equations [Volume 10, Issue 4, 2023, Pages 339-353]
Kazeminasab, Bagher Preparation of Nitrogen-Doped Graphene By Solvothermal Process as Supporting Material for Fuel Cell Catalysts [Volume 1, Issue 2, 2014, Pages 113-119]
Kazerouni, H. Sulfurous Analysis of Bioelectricity Generation from Sulfate-reducing Bacteria (SRB) in a Microbial Fuel Cell [Volume 4, Issue 4, 2017, Pages 307-321]
Kebria, Daryoush Effect of batch vs. continuous mode of operation on microbial desalination cell performance treating municipal wastewater [Volume 3, Issue 4, 2016, Pages 281-290]
Kermani, Mohammad Jafar Performance Improvement of PEM Fuel Cells Using Air Channel Indentation; Part I: Mechanisms to Enrich Oxygen Concentration in Catalyst Layer [Volume 1, Issue 4, 2014, Pages 199-207]
Kermani, Mohammad Jafar Generalization of a CFD Model to Predict the Net Power in PEM Fuel Cells [Volume 6, Issue 1, 2019, Pages 23-37]
Khalilian, Morteza Thermodynamic investigation of applying a thermoelectric generator to produce hydrogen in a multigeneration system [Volume 10, Issue 2, 2023, Pages 131-145]
Khandan, Nahid Hydrogen production via steam reforming of LPG on Ni/Zeolite catalysts [Volume 1, Issue 4, 2014, Pages 233-238]
Khandan, Nahid Optimization of the preparation procedure of Ni/Al2O3 catalyst for steam reforming of n-butane [Volume 2, Issue 3, 2015, Pages 139-149]
Khandan, Nahid Methanol steam reforming; Effects of various metal oxides on the properties of a Cu-based catalyst [Volume 3, Issue 4, 2016, Pages 291-299]
Khandan, Nahid Enhancing the CO tolerance of Pt/C as PEM fuel cell anode catalyst by modifying the catalyst synthesis method [Volume 6, Issue 1, 2019, Pages 71-81]
Kheirmand, Mehdi Oxygen reduction reaction on Pt/C at the presence of super paramagnetic of Fe3O4 nanoparticles for PEMFCs [Volume 1, Issue 1, 2014, Pages 41-46]
Kheirmand, Mehdi Single walled carbon nanotube in the reaction layer of gas diffusion electrode for oxygen reduction reaction [Volume 1, Issue 2, 2014, Pages 75-82]
Kheirmand, Mehdi Electrodeposition of platinum nanoparticles on reduced graphene oxide as an efficient catalyst for oxygen reduction reaction [Volume 2, Issue 1, 2015, Pages 7-12]
Kheirmand, Mehdi Palladium nanoparticles supported on carbon black powder as an effective anodic catalyst for application in a direct glucose alkaline fuel cell [Volume 3, Issue 1, 2016, Pages 11-17]
Kheirmand, Mehdi Effect of Solution Dielectric Constant on the Preparation of Gas Diffusion Electrode Reaction Layer for the Oxygen Reduction Reaction [Volume 10, Issue 2, 2023, Pages 97-109]
Kheirmand, Mehdi Evaluation of electrocatalytic performance of PtCo/C nanoparticles in different proportions of cobalt for oxygen reduction reaction [Volume 10, Issue 4, 2023, Pages 291-297]
Kheirmand, Mehdi Metal‐organic framework‐derived Cu@Co4N nanoparticles anchored on N-doped carbon nanotubes for efficient and stable ORR activity [Volume 10, Issue 4, 2023, Pages 327-337]
Kheirmand, Mehdi Chemical Kinetics analysis of a Zinc-Air Fuel Cell [(Articles in Press)]
Kheirmand, Mehdi Lithium-oxygen charge transfer interaction: a deformation density analysis study [(Articles in Press)]
Kheradmandinia, Shaker Enhancing the CO tolerance of Pt/C as PEM fuel cell anode catalyst by modifying the catalyst synthesis method [Volume 6, Issue 1, 2019, Pages 71-81]
KhodadyKoochacsaraiy, Raheleh Mechanical behavior of metal hydrides and hydrogen storage containers: A review [Volume 10, Issue 3, 2023, Pages 257-278]
Khodaei, Milad Modeling and simulation of the fluid dynamic and performance of the Pd-based membrane by CFD for hydrogen separation [Volume 9, Issue 1, 2022, Pages 19-25]
Khorshidian, M A review of the main mechanisms of catalyst layer degradation in polymer electrolyte membrane fuel cell (PEMFC) and different performance recovery methods [Volume 6, Issue 2, 2019, Pages 91-115]
Khorshidian, Majid Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
Khorshidian, Majid Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
KIRKGEÇİt, Rabia Synthesis and Characterization of Co-doped CeO2 Ceramic Electrolyte for IT-SOFC [Volume 6, Issue 2, 2019, Pages 163-170]
Kiyani, Roya Multi-walled carbon nanotubes supported palladium nanoparticles: Synthesis, characterization and catalytic activity towards methanol electro oxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 67-74]
Kojoury-Naftchali, Mostafa High Step-Up Converter with Low Voltage Stress for Fuel Cell Applications [Volume 9, Issue 2, 2022, Pages 117-132]
Koosha, Morteza Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
Kord Firuzjaei, Vahid Simulation of integrated purification systems for hydrogen production in methanol steam reforming process [Volume 10, Issue 3, 2023, Pages 158-199]
Kouzegar, Zahra Preparation of Pd composite membrane via organic-inorganic activation method in electroless plating technique [Volume 2, Issue 3, 2015, Pages 151-158]

L

Logrono, Washington The significance of key operational variables to the enhancement of hydrogen production in a single-chamber microbial electrolysis cell (MEC) [Volume 2, Issue 2, 2015, Pages 85-97]
Lohrasbi, Elaheh Synthesis of Supported Pt Alloy three Dimensional Rhombus Shapes Nanoparticles for Oxygen Reduction Reaction [Volume 2, Issue 2, 2015, Pages 121-130]
Lohrasbi, Elaheh Effect of Solution Dielectric Constant on the Preparation of Gas Diffusion Electrode Reaction Layer for the Oxygen Reduction Reaction [Volume 10, Issue 2, 2023, Pages 97-109]

M

Madram, Ali Reza Effect of temperature on kinetics of the hydrogen evolution reaction on Ni-P-C cathodes in alkaline solution [Volume 1, Issue 4, 2014, Pages 215-222]
Madram, Ali Reza Application of Pd-Substituted Ni-Al Layered Double Hydroxides for the Hydrogen Evolution Reaction [Volume 2, Issue 4, 2015, Pages 253-261]
Madram, Ali Reza In situ activation of a Ni catalyst with Mo ion for hydrogen evolution reaction in alkaline solution [Volume 3, Issue 2, 2016, Pages 151-158]
Madram, Ali Reza A high performance lithium-ion battery using LiNa0.02K0.01FePO4/C as cathode material and anatase TiO2 nanotube arrays as anode material [Volume 4, Issue 1, 2017, Pages 27-35]
Madram, Ali Reza Preparation of Ni-P-CeO2 electrode and study on electrocatalytic properties for hydrogen evolution reaction [Volume 5, Issue 1, 2018, Pages 1-11]
Madram, Ali Reza Kinetics study of hydrogen evolution reaction on a high porous three dimensional NiPC alloy [Volume 8, Issue 2, 2021, Pages 95-101]
Mahmood, Faizal Theoretical study of the effect of hydrogen addition to natural gas-fueled direct-injection engines [Volume 1, Issue 1, 2014, Pages 11-20]
Mahmoodi, Farshid Transient Three-dimensional Simulation of a Metal Hydride Hydrogen Storage Tank Interconnected to a PEM Fuel Cell by Heat Pipes [Volume 6, Issue 2, 2019, Pages 117-132]
Mahmoudi, Mehrdad Thermodynamic investigation of applying a thermoelectric generator to produce hydrogen in a multigeneration system [Volume 10, Issue 2, 2023, Pages 131-145]
Mahmoudi Najafi, Seyed Heydar Highly Ordered Nanoporous β-Ni(OH)2 Nanobelt Array Architectures as Electrode Material for Electrochemical Capacitors: Design, Synthesis, Characterization and Supercapacitive Evaluation [Volume 10, Issue 2, 2023, Pages 157-171]
Majidi Beiragh, Masoud Nanostructured Palladium-Doped Silica Membrane Layer Synthesis for Hydrogen Separation: Effect of Activated Sublayers [Volume 6, Issue 1, 2019, Pages 1-9]
Malek Khachatourian, Adrine Synthesis and characterization of Ag-Y co-doped Mn-Co spinel for solid oxide fuel cell application [Volume 8, Issue 1, 2021, Pages 43-49]
Malek Khachatourian, Adrine Synthesis and electrochemical properties of Sr3Fe1.8Co0.2O7 as a solid oxide fuel cell cathode [Volume 8, Issue 1, 2021, Pages 51-58]
Mansouri, Seyed Hossein The Impact of Wettability on Effective Properties of Cathode Catalyst Layer in a Proton Exchange Membrane Fuel Cell [Volume 3, Issue 3, 2016, Pages 233-245]
Marashi, Pirooz The effect of copper infiltration on LSM Cathode microstructure in high temperature solid oxide fuel cells [Volume 10, Issue 4, 2023, Pages 281-290]
Mardanpour, Mohammad Mahdi Modeling of Multi-population Microbial Fuel and Electrolysis Cells Based on the Bioanode Potential Conditions [Volume 1, Issue 4, 2014, Pages 247-260]
Mardanpour, Mohammad Mahdi A comparative study of three types of anode electrodes in a microfluidic microbial fuel cell [Volume 8, Issue 1, 2021, Pages 13-21]
Maroufi, Arman Performance Analysis and Working Fluids Selection of Organic Rankine Cycle in a Triple Power Generation System Combined with Gas Turbine and Solid Oxide Fuel Cell Cycles [Volume 10, Issue 1, 2023, Pages 11-32]
Masrori Saadat, Seyed Hossein Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
Masrori Saadat, Seyed Hossein Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
MEHRABIAN, Mozafar ali Modeling heat and mass transfer in laminar forced flow between parallel plates channel imposed to suction or injection [Volume 2, Issue 1, 2015, Pages 35-46]
Mehrabinejad, Kolsoom Evaluation of electrocatalytic performance of PtCo/C nanoparticles in different proportions of cobalt for oxygen reduction reaction [Volume 10, Issue 4, 2023, Pages 291-297]
Mehranjani, Alireza Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
Meshkani, Fereshteh Investigation of the catalytic performance and coke formation of nanocrystalline Ni/SrO-Al2O3 catalyst in dry reforming of methane [Volume 3, Issue 4, 2016, Pages 315-322]
Mirzaee, Iraj Thermodynamic evaluation of a novel geothermal and solar-driven multigeneration system for hydrogen and freshwater production [Volume 10, Issue 1, 2023, Pages 51-67]
Mirzaee, Iraj Thermodynamic investigation of applying a thermoelectric generator to produce hydrogen in a multigeneration system [Volume 10, Issue 2, 2023, Pages 131-145]
Moayeri, Mona Morphological and physical study of Cu-Ni sintered porous wicks used in heat pipes and fuel cells [Volume 3, Issue 4, 2016, Pages 255-266]
Moazemi Goudarzi, Ali Mechanical behavior of metal hydrides and hydrogen storage containers: A review [Volume 10, Issue 3, 2023, Pages 257-278]
Mohammad Ebrahimi, Iman Three-dimensional modeling of transport phenomena in a planar anode-supported solid oxide fuel cell [Volume 4, Issue 1, 2017, Pages 37-52]
Mohammadi, Kamal Developed endplate geometry for uniform contact pressure distribution over PEMFC active area [Volume 7, Issue 1, 2020, Pages 1-12]
Mohammadi, Kamal Mechanical and chemical characteristics of the PEM fuel cell sealants in simulated environment [Volume 9, Issue 2, 2022, Pages 163-178]
Mohammadi*, mohammad Mahdi Experimental study and numerical modeling of vibrational characteristics of a 500W PEM fuel cell stack [Volume 9, Issue 1, 2022, Pages 39-52]
Mohammadi-Ahmar, akbar Numerical analysis of reactant transport in the novel tubular polymer electrolyte membrane fuel cells [Volume 2, Issue 3, 2015, Pages 181-196]
Mohammadpoor, H Sulfurous Analysis of Bioelectricity Generation from Sulfate-reducing Bacteria (SRB) in a Microbial Fuel Cell [Volume 4, Issue 4, 2017, Pages 307-321]
Mohammadpour Mir, Amirhossein Fuel Cell Power System Conceptual Design for Unmanned Underwater Vehicle [Volume 10, Issue 1, 2023, Pages 33-50]
Mohammadzadeh, Vahid Comparison of waste heat recovery from a Proton Exchange Membrane fuel cell by gas turbine or Organic Rankin Cycle: a display of 3E analysis [Volume 8, Issue 2, 2021, Pages 103-112]
Mohammed Qasim, Hayder Analysis and implementation of high step-up SEPIC converter without coupled inductor for high voltage applications [Volume 10, Issue 3, 2023, Pages 201-213]
Mohebbi, Mehdi Preparation of Ni-P-CeO2 electrode and study on electrocatalytic properties for hydrogen evolution reaction [Volume 5, Issue 1, 2018, Pages 1-11]
Mohebbi-Kalhori, Davood Numerical investigation of methanol crossover through the membrane in a direct methanol fuel cell [Volume 5, Issue 1, 2018, Pages 21-33]
Mohebi, Hamed Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
Molaahmad, Abolfazl Synthesis and characterization of nanostructured Cux (Mn1.5-x/2Co1.5-x/2)O4 as an interconnect coating for solid oxide fuel cell [Volume 8, Issue 1, 2021, Pages 35-41]
Momenifar, Mohammad Developed endplate geometry for uniform contact pressure distribution over PEMFC active area [Volume 7, Issue 1, 2020, Pages 1-12]
Momenifar, Mohammad Mechanical and chemical characteristics of the PEM fuel cell sealants in simulated environment [Volume 9, Issue 2, 2022, Pages 163-178]
Momenifar, Mohammad Study of Contact Pressure Distribution over MEA of the Three-Cell PEMFC with Metallic Bipolar Plates [Volume 10, Issue 1, 2023, Pages 69-79]
Mongashti, Zahra Lithium-oxygen charge transfer interaction: a deformation density analysis study [(Articles in Press)]
Moosazadeh, hamid Experimental study and numerical modeling of vibrational characteristics of a 500W PEM fuel cell stack [Volume 9, Issue 1, 2022, Pages 39-52]
Morshedsolouk, Fattaneh Mechanical behavior of metal hydrides and hydrogen storage containers: A review [Volume 10, Issue 3, 2023, Pages 257-278]
Mostafavi, Ebrahim La0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study [Volume 1, Issue 4, 2014, Pages 239-246]
Mozaffari, Sayed Ahmad Synthesis of Supported Pt Alloy three Dimensional Rhombus Shapes Nanoparticles for Oxygen Reduction Reaction [Volume 2, Issue 2, 2015, Pages 121-130]
Mozaffari, Sayed Ahmad Highly Ordered Nanoporous β-Ni(OH)2 Nanobelt Array Architectures as Electrode Material for Electrochemical Capacitors: Design, Synthesis, Characterization and Supercapacitive Evaluation [Volume 10, Issue 2, 2023, Pages 157-171]
Muftah, Saleh A Prospects and Challenges for the Production and Use of Green Hydrogen as a Promising Energy in Libya [(Articles in Press)]

N

Najafpour, Ghasem Effect of batch vs. continuous mode of operation on microbial desalination cell performance treating municipal wastewater [Volume 3, Issue 4, 2016, Pages 281-290]
Naji, Leila Electrochemical Study of Hydrogen Adsorption/Reduction (HAR) Reaction on Graphene Oxide as Electrocatalyst for Proton Exchange Membrane Fuel Cells [Volume 2, Issue 2, 2015, Pages 99-107]
Nasiri, Mohammad The effect of solvent of titanium precursor in the sol-gel process on the activity of TiO2 nanoparticles for H2 production [Volume 4, Issue 2, 2017, Pages 139-151]
Nasiri, Mohammad Preparation of Ni-P-CeO2 electrode and study on electrocatalytic properties for hydrogen evolution reaction [Volume 5, Issue 1, 2018, Pages 1-11]
Nassernejad, Bahram Kinetic study of CO desorption from cathodic electrochemically treated carbon paper supported Pt electrodes [Volume 4, Issue 3, 2017, Pages 201-207]
Nemati, Ali Synthesis and electrochemical properties of Sr3Fe1.8Co0.2O7 as a solid oxide fuel cell cathode [Volume 8, Issue 1, 2021, Pages 51-58]
Norouzi, Nima Exergy and Energy Analysis of Effective Utilization of Carbon Dioxide in the Gas-to-Methanol Process [Volume 7, Issue 1, 2020, Pages 13-31]
Norouzi, Zahra Highly Ordered Nanoporous β-Ni(OH)2 Nanobelt Array Architectures as Electrode Material for Electrochemical Capacitors: Design, Synthesis, Characterization and Supercapacitive Evaluation [Volume 10, Issue 2, 2023, Pages 157-171]
Nourouzi, Salman Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior [Volume 3, Issue 1, 2016, Pages 1-10]
Nourouzi, Salman Finite Element Simulation and ANFIS Prediction of Dimensional Error Effect on distribution of BPP/GDL Contact Pressure in PEM Fuel Cell [Volume 4, Issue 2, 2017, Pages 125-138]
Nozad Golikand, Ahmad Single walled carbon nanotube in the reaction layer of gas diffusion electrode for oxygen reduction reaction [Volume 1, Issue 2, 2014, Pages 75-82]

O

Olyaee, Saeed Modeling of measurement error in refractive index determination of fuel cell using neural network and genetic algorithm [Volume 1, Issue 2, 2014, Pages 95-104]
Omidbakhsh Amiri, Elham Reforming Integrated with Oxidation in Micro-Heat Exchanger Reactor with Circular Micro-Channels [Volume 1, Issue 2, 2014, Pages 65-74]
Omidbakhsh Amiri, Elham Steam Reforming Integrated with Oxidation of Methanol in a Micro-Channel Reactor with Different Micro-Baffle Shapes [Volume 2, Issue 2, 2015, Pages 75-83]
Omidifar, Mina Modeling and simulation of the fluid dynamic and performance of the Pd-based membrane by CFD for hydrogen separation [Volume 9, Issue 1, 2022, Pages 19-25]
Ommi, Fathollah Investigation of vessels pressure effect on PEM electrolyzer performance by using a new OneDimensional Dynamic Model [Volume 2, Issue 4, 2015, Pages 271-281]
Ommi, Fathollah Comparison of waste heat recovery from a Proton Exchange Membrane fuel cell by gas turbine or Organic Rankin Cycle: a display of 3E analysis [Volume 8, Issue 2, 2021, Pages 103-112]
Ozgoli, Hassan Ali Energy Price Analysis of a Biomass Gasification-Solid Oxide Fuel Cell-Gas Turbine Power Plant [Volume 3, Issue 1, 2016, Pages 45-58]
Ozgoli, Hassan Ali Exergy Analysis of a Molten Carbonate Fuel Cell-Turbo Expander-Steam Turbine Hybrid Cycle [Volume 3, Issue 4, 2016, Pages 267-279]
Ozgoli, Hassan Ali Integration of a Vanadium Redox Flow Battery with a Proton Exchange Membrane Fuel Cell as an Energy Storage System [Volume 4, Issue 1, 2017, Pages 53-68]
Ozgoli, Hassan Ali Simulation of a Solid Oxide Fuel Cell with External Steam Methane Reforming and Bypass [Volume 4, Issue 2, 2017, Pages 103-118]

P

Pahnabi, Amirhossein High Step-Up Converter with Low Voltage Stress for Fuel Cell Applications [Volume 9, Issue 2, 2022, Pages 117-132]
Pahnabi, Amirhossein Experimental Investigation of a High Efficiency Power Path Controller for PEM Fuel Cell and Battery Hybrid System [Volume 9, Issue 2, 2022, Pages 149-161]
Parnian, Mohammad Javad Preparation of Nitrogen-Doped Graphene By Solvothermal Process as Supporting Material for Fuel Cell Catalysts [Volume 1, Issue 2, 2014, Pages 113-119]
Parnian, Mohammad Javad Multi-walled carbon nanotubes supported palladium nanoparticles: Synthesis, characterization and catalytic activity towards methanol electro oxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 67-74]
Parnian, Mohammad Javad Studies on the SPEEK membrane with low degree of sulfonation as a stable proton exchange membrane for fuel cell applications [Volume 3, Issue 3, 2016, Pages 221-232]
Pashaie, Pouya Finite Element Simulation and ANFIS Prediction of Dimensional Error Effect on distribution of BPP/GDL Contact Pressure in PEM Fuel Cell [Volume 4, Issue 2, 2017, Pages 125-138]
Paydar, Mohammad Hossein Synthesis and investigation on microstructure and electrical conductivity of Ruddlesden-Popper phase, La1.9Sr0.1Ni0.7Cu0.3O4 (LSNC), as cathode material for intermediate temperature solid oxide fuel cells [Volume 8, Issue 2, 2021, Pages 69-76]
Paydar, Sara Synthesis and investigation on microstructure and electrical conductivity of Ruddlesden-Popper phase, La1.9Sr0.1Ni0.7Cu0.3O4 (LSNC), as cathode material for intermediate temperature solid oxide fuel cells [Volume 8, Issue 2, 2021, Pages 69-76]
Penhani, Hossein Performance Analysis and Working Fluids Selection of Organic Rankine Cycle in a Triple Power Generation System Combined with Gas Turbine and Solid Oxide Fuel Cell Cycles [Volume 10, Issue 1, 2023, Pages 11-32]
Pirkandi, Jamasb Performance Analysis and Working Fluids Selection of Organic Rankine Cycle in a Triple Power Generation System Combined with Gas Turbine and Solid Oxide Fuel Cell Cycles [Volume 10, Issue 1, 2023, Pages 11-32]
Pishvaie, mahmoud reza New Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell [Volume 2, Issue 4, 2015, Pages 241-252]
Porhemmat, Zahra Mechanistic Approach Developed to Estimation of Exchange Current Density and Charge Transfer Coefficient in Lead Acid Batteries [(Articles in Press)]
Pourarian, Faiz "Physical properties and electronic structure of LaNi5 compound before and after hydrogenation: An experimental and theoretical approach" [Volume 1, Issue 1, 2014, Pages 27-39]
Pourarian, Faiz Synthesis, characterization and hydrogen storage properties of Mm(Ni,Co,Mn,Al)5 alloy [Volume 1, Issue 2, 2014, Pages 83-94]
Pourarian, Faiz Density Functional Studies on Crystal Structure and electronic properties of Potassium Alanate as a candidate for Hydrogen storage [Volume 2, Issue 3, 2015, Pages 169-179]
Pouretedal, Hamid Reza Effect of temperature on kinetics of the hydrogen evolution reaction on Ni-P-C cathodes in alkaline solution [Volume 1, Issue 4, 2014, Pages 215-222]
Pouretedal, Hamid Reza The effect of solvent of titanium precursor in the sol-gel process on the activity of TiO2 nanoparticles for H2 production [Volume 4, Issue 2, 2017, Pages 139-151]
Pourmahmoud, Nader The simulation of novel annular shape on the Performance in Proton Exchange Membrane Fuel Cell [Volume 1, Issue 3, 2014, Pages 175-188]
Pourmahmoud, Nader Modeling and simulation of a new architecure stack applied on the PEM Fuel Cell [Volume 3, Issue 2, 2016, Pages 99-112]

R

Rafia, Nesa Nanostructured Palladium-Doped Silica Membrane Layer Synthesis for Hydrogen Separation: Effect of Activated Sublayers [Volume 6, Issue 1, 2019, Pages 1-9]
Rahgoshay, Majid Experimental Study of Oxidant Effect on Lifetime of PEM Fuel Cell [Volume 7, Issue 1, 2020, Pages 33-43]
Rahgoshay, Majid Design and Analysis of an Innovative Dead-end Cascade-type PEMFC Stack at Different Orientations [Volume 7, Issue 1, 2020, Pages 81-96]
Rahgoshay, Majid Quantitative study of water level control system in PEM fuel cell separator for conservation of reactant gases [Volume 8, Issue 1, 2021, Pages 1-12]
Rahgoshay, Seyed Majid Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
Rahgoshay, Seyed Majid Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
Rahimi, Masood Sulfurous Analysis of Bioelectricity Generation from Sulfate-reducing Bacteria (SRB) in a Microbial Fuel Cell [Volume 4, Issue 4, 2017, Pages 307-321]
Rahimi, Rahbar Numerical investigation of methanol crossover through the membrane in a direct methanol fuel cell [Volume 5, Issue 1, 2018, Pages 21-33]
Rahimi, Rahbar Transient Three-dimensional Simulation of a Metal Hydride Hydrogen Storage Tank Interconnected to a PEM Fuel Cell by Heat Pipes [Volume 6, Issue 2, 2019, Pages 117-132]
Rahimi-Ahar, Zohreh Numerical study on the performance prediction of a proton exchange membrane (PEM) fuel cell [Volume 4, Issue 4, 2017, Pages 249-263]
Rahimi-Esbo, Mazaher Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
Rahimi-Esbo, Mazaher Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
Rahimi-Esbo, Mazaher Experimental Study of Oxidant Effect on Lifetime of PEM Fuel Cell [Volume 7, Issue 1, 2020, Pages 33-43]
Rahimi-Esbo, Mazaher Design and Analysis of an Innovative Dead-end Cascade-type PEMFC Stack at Different Orientations [Volume 7, Issue 1, 2020, Pages 81-96]
Rahimi-Esbo, Mazaher Quantitative study of water level control system in PEM fuel cell separator for conservation of reactant gases [Volume 8, Issue 1, 2021, Pages 1-12]
Rahimi-Esbo, Mazaher Simulation of integrated purification systems for hydrogen production in methanol steam reforming process [Volume 10, Issue 3, 2023, Pages 158-199]
Rahimi-Esbo, Mazaher Assessment of a novel photovoltaic-electrolyzer-fuel cell-ORC hybrid energy system for hydrogen and power production [Volume 10, Issue 2, 2023, Pages 111-130]
Rahimi Takami, Mehdi Lattice Boltzmann Modeling of Methane Steam Reforming Reactions in Solid Oxide Fuel Cells [Volume 7, Issue 1, 2020, Pages 61-79]
Rahmani, Soudabeh A comparative study on the kinetics of carbon dioxide methanation over bimetallic and monometallic catalysts [Volume 3, Issue 1, 2016, Pages 59-71]
Rahmanian, Alireza Electrochemical Study of Hydrogen Adsorption/Reduction (HAR) Reaction on Graphene Oxide as Electrocatalyst for Proton Exchange Membrane Fuel Cells [Volume 2, Issue 2, 2015, Pages 99-107]
Rajabinasab, Morteza Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
Ramin, Farzin The effect of inclined radial flow in proton exchange membrane fuel cells performance [Volume 1, Issue 3, 2014, Pages 141-152]
Ramin, Farzin The effect of vertical injection of reactants to the membrane electrode assembly on the performance of a PEM fuel cell [Volume 3, Issue 3, 2016, Pages 167-182]
Ramin, Farzin The effect of increasing the multiplicity of flow fields contact surface on the performance of PEM fuel cell [Volume 4, Issue 1, 2017, Pages 69-83]
Ranjbar, Maryam Preparation, characterization and the study of electrochemical behavior of Y-doped Bariumcerate powders by new precursors [Volume 10, Issue 1, 2023, Pages 1-10]
Ranjbar, Maryam Nickel oxide-gadolinium doped ceria synthesized by new methods as anodes material for solid oxide fuel cells [Volume 9, Issue 2, 2022, Pages 133-147]
Ranjbar, Mehdi Hydrogen sensing by localized surface plasmon resonance in colloidal solutions of Au-WO3-Pd [Volume 4, Issue 2, 2017, Pages 119-124]
Raoof, Amir The Impact of Wettability on Effective Properties of Cathode Catalyst Layer in a Proton Exchange Membrane Fuel Cell [Volume 3, Issue 3, 2016, Pages 233-245]
Rashidi, Alimorad Facile Synthesis of N, S-Doped Graphene from Sulfur Trioxide Pyridine Precursor for the Oxygen Reduction Reaction [Volume 4, Issue 3, 2017, Pages 231-240]
Rastegari-fard, Freshteh Oxygen reduction reaction on Pt/C at the presence of super paramagnetic of Fe3O4 nanoparticles for PEMFCs [Volume 1, Issue 1, 2014, Pages 41-46]
Rezaei, Mehran Effect of K2O on the catalytic performance of Ni catalysts supported on nanocrystalline Al2O3 in CO2 reforming of methane [Volume 2, Issue 4, 2015, Pages 215-226]
Rezaei, Mehran A comparative study on the kinetics of carbon dioxide methanation over bimetallic and monometallic catalysts [Volume 3, Issue 1, 2016, Pages 59-71]
Rezaei, Mehran Investigation of the catalytic performance and coke formation of nanocrystalline Ni/SrO-Al2O3 catalyst in dry reforming of methane [Volume 3, Issue 4, 2016, Pages 315-322]
Rezaei Firozjaee, Mohammad Experimental Investigation of a High Efficiency Power Path Controller for PEM Fuel Cell and Battery Hybrid System [Volume 9, Issue 2, 2022, Pages 149-161]
Rezaei Firozjaee, Mohammad Fuel Cell Power System Conceptual Design for Unmanned Underwater Vehicle [Volume 10, Issue 1, 2023, Pages 33-50]
Rezaei Firozjaee, Mohammad Assessment of a novel photovoltaic-electrolyzer-fuel cell-ORC hybrid energy system for hydrogen and power production [Volume 10, Issue 2, 2023, Pages 111-130]
Riazat, Mohammad A new approach to microstructure optimization of solid oxide fuel cell electrodes [Volume 4, Issue 2, 2017, Pages 93-102]
Rowshanzamir, Soosan Preparation of Nitrogen-Doped Graphene By Solvothermal Process as Supporting Material for Fuel Cell Catalysts [Volume 1, Issue 2, 2014, Pages 113-119]
Rowshanzamir, Soosan Hydrothermal synthesis of nano-size zirconia using commercial zirconia powder: process optimization through response surface methodology [Volume 1, Issue 3, 2014, Pages 163-173]
Rowshanzamir, Soosan Multi-walled carbon nanotubes supported palladium nanoparticles: Synthesis, characterization and catalytic activity towards methanol electro oxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 67-74]
Rowshanzamir, Soosan Investigation of ion transport and water content properties in anion exchange membranes based on polysulfone for solid alkaline fuel cell application [Volume 2, Issue 1, 2015, Pages 13-25]
Rowshanzamir, Soosan Studies on the SPEEK membrane with low degree of sulfonation as a stable proton exchange membrane for fuel cell applications [Volume 3, Issue 3, 2016, Pages 221-232]
Rowshanzamir, Soosan Dynamic investigation of hydrocarbon proton exchange membrane Fuel Cell [Volume 4, Issue 3, 2017, Pages 219-230]

S

SAADAOUI, Farid Development and Simulation of a PEM Fuel Cell model for Prediction of Water Content and Power Generation [Volume 4, Issue 4, 2017, Pages 289-299]
Saadatinasab, Mohammad Determination of thermodynamic parameters of hydrogen permeation of palladium membrane for considering the effect of stainless steel support [Volume 1, Issue 1, 2014, Pages 1-10]
Saberimoghaddam, Ali How to Design a Cryogenic Joule-Thomson Cooling System: Case Study of Small Hydrogen Liquefier [Volume 3, Issue 2, 2016, Pages 113-125]
Saberimoghaddam, Ali Influence of unsuitable operational conditions on the transient performance of a small hydrogen liquefier [Volume 3, Issue 3, 2016, Pages 199-212]
Saberimoghaddam, Ali Investigation of carbon dioxide capture from hydrogen using the thermal pressure swing adsorption process: Central composite design modeling [Volume 4, Issue 1, 2017, Pages 13-26]
Saberimoghaddam*, Ali Performance verification of a laboratory scale hydrogen/oxygen combustion chamber [Volume 9, Issue 1, 2022, Pages 27-38]
Saboohi, Zoheir Comparison of waste heat recovery from a Proton Exchange Membrane fuel cell by gas turbine or Organic Rankin Cycle: a display of 3E analysis [Volume 8, Issue 2, 2021, Pages 103-112]
Sadeghi, Davood Morphological and physical study of Cu-Ni sintered porous wicks used in heat pipes and fuel cells [Volume 3, Issue 4, 2016, Pages 255-266]
Sadeghi, Saber Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
Sadeghian, Zahra The effect of copper infiltration on LSM Cathode microstructure in high temperature solid oxide fuel cells [Volume 10, Issue 4, 2023, Pages 281-290]
Sadrameli, Seyed Mojtaba Sulfurous Analysis of Bioelectricity Generation from Sulfate-reducing Bacteria (SRB) in a Microbial Fuel Cell [Volume 4, Issue 4, 2017, Pages 307-321]
Safavenejad, Ali Performance assessment of a SOFC cogeneration system for residential buildings located in eastern Iran [Volume 3, Issue 2, 2016, Pages 81-97]
Sahebi Joibari, Iman Experimental Analysis of Fiber Laminating Effects on Flexural Rigidity of Composite Endplates for Use in PEM Fuel Cells [Volume 9, Issue 2, 2022, Pages 97-106]
Salamati, Hadi Hydrogen sensing by localized surface plasmon resonance in colloidal solutions of Au-WO3-Pd [Volume 4, Issue 2, 2017, Pages 119-124]
Samimi, Abdolreza Implementation of Chitosan modified ultrafiltration hollow fiber as proton exchange membrane of ml-scale microbial fuel cells [Volume 10, Issue 4, 2023, Pages 299-310]
Sang Davini, Hossein Design and Investigation of Honeycomb End Plates for PEM Fuel Cells [Volume 4, Issue 3, 2017, Pages 189-199]
Sarhaddi, Reza "Physical properties and electronic structure of LaNi5 compound before and after hydrogenation: An experimental and theoretical approach" [Volume 1, Issue 1, 2014, Pages 27-39]
Saydi, Davood Optimization of the preparation procedure of Ni/Al2O3 catalyst for steam reforming of n-butane [Volume 2, Issue 3, 2015, Pages 139-149]
Scholta, Joachim Generalization of a CFD Model to Predict the Net Power in PEM Fuel Cells [Volume 6, Issue 1, 2019, Pages 23-37]
Seddighi, Shahaboddin Numerical-experimental study on the thickness distribution of metallic bipolar plates for PEM fuel cells [Volume 9, Issue 1, 2022, Pages 1-18]
Seddighi, Shahaboddin Study of the forming process effects on the wrinkling and thinning percentage of the micro-channels with serpentine layout [Volume 10, Issue 1, 2023, Pages 81-93]
Sedighi, Majid A review of the main mechanisms of catalyst layer degradation in polymer electrolyte membrane fuel cell (PEMFC) and different performance recovery methods [Volume 6, Issue 2, 2019, Pages 91-115]
Sedighi, Majid Simulation of integrated purification systems for hydrogen production in methanol steam reforming process [Volume 10, Issue 3, 2023, Pages 158-199]
Shahgholian, Ghazanfar Comparison and Analysis of Dynamic Behavior of Load Frequency Control in Power System with Steam, Hydro and Gas Power Plants [Volume 10, Issue 4, 2023, Pages 311-325]
Shakeri, Mohsen Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior [Volume 3, Issue 1, 2016, Pages 1-10]
Shakeri, Mohsen A new approach to microstructure optimization of solid oxide fuel cell electrodes [Volume 4, Issue 2, 2017, Pages 93-102]
Shakeri, Mohsen Finite Element Simulation and ANFIS Prediction of Dimensional Error Effect on distribution of BPP/GDL Contact Pressure in PEM Fuel Cell [Volume 4, Issue 2, 2017, Pages 125-138]
Shakouri Kalfati, Milad Dynamic investigation of hydrocarbon proton exchange membrane Fuel Cell [Volume 4, Issue 3, 2017, Pages 219-230]
Sharifi, Shima Numerical investigation of methanol crossover through the membrane in a direct methanol fuel cell [Volume 5, Issue 1, 2018, Pages 21-33]
Shateri, Majid Energy Management Simulation in a PEM Fuel Cell System [Volume 2, Issue 1, 2015, Pages 1-6]
Shirani-Faradonbeh, Hasan Synthesis and investigation on microstructure and electrical conductivity of Ruddlesden-Popper phase, La1.9Sr0.1Ni0.7Cu0.3O4 (LSNC), as cathode material for intermediate temperature solid oxide fuel cells [Volume 8, Issue 2, 2021, Pages 69-76]
Shirvani, Hassan Thermodynamic evaluation of a novel geothermal and solar-driven multigeneration system for hydrogen and freshwater production [Volume 10, Issue 1, 2023, Pages 51-67]
Simayi, Yibadatihan The significance of key operational variables to the enhancement of hydrogen production in a single-chamber microbial electrolysis cell (MEC) [Volume 2, Issue 2, 2015, Pages 85-97]
Solaimany Nazar, Ali Reza Numerical study on the performance prediction of a proton exchange membrane (PEM) fuel cell [Volume 4, Issue 4, 2017, Pages 249-263]
Sovizi, Mohammad Reza A high performance lithium-ion battery using LiNa0.02K0.01FePO4/C as cathode material and anatase TiO2 nanotube arrays as anode material [Volume 4, Issue 1, 2017, Pages 27-35]
Sovizi, Mohammad Reza Preparation of Ni-P-CeO2 electrode and study on electrocatalytic properties for hydrogen evolution reaction [Volume 5, Issue 1, 2018, Pages 1-11]
Steinberger-Wilckens, Robert Numerical Investigation of a Hydrogen-fuelled Planar AP-SOFC Performance with Special Focus on Safe Operation [Volume 8, Issue 2, 2021, Pages 113-125]

T

Tafazoli, Mehdi A new approach to microstructure optimization of solid oxide fuel cell electrodes [Volume 4, Issue 2, 2017, Pages 93-102]
Taghizadeh, Majid Hydrogen production by steam reforming of dimethyle ether over Cu/ZnO/Al2O3 and H-ZSM-5 catalysts: An experimental and modeling study [Volume 1, Issue 3, 2014, Pages 153-161]
Taherinia, Maryam The effect of solvent of titanium precursor in the sol-gel process on the activity of TiO2 nanoparticles for H2 production [Volume 4, Issue 2, 2017, Pages 139-151]
Talebi, Saeed Exergy and Energy Analysis of Effective Utilization of Carbon Dioxide in the Gas-to-Methanol Process [Volume 7, Issue 1, 2020, Pages 13-31]
Talebi Ghadikolaee, Hossein Study of the forming process effects on the wrinkling and thinning percentage of the micro-channels with serpentine layout [Volume 10, Issue 1, 2023, Pages 81-93]
Talebi-Ghadikolaee, Hossein Numerical-experimental study on the thickness distribution of metallic bipolar plates for PEM fuel cells [Volume 9, Issue 1, 2022, Pages 1-18]
Tanha, Mostafa Saber Effect of CO in the reformatted fuel on the performance of Polymer Electrolyte Membrane (PEM) fuel cell [Volume 4, Issue 2, 2017, Pages 153-165]
Tavakkoli, Mohammad Javad Prediction the hydrogen adsorption isotherm on nickel decorated carbon nanotubes by applying artificial neural network modeling [Volume 8, Issue 2, 2021, Pages 61-68]
Torabi, Morteza Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]

V

Vaezi, Mohammad Javad Effect of Dehydration Temperature on the H2 Separation Potential of Hydroxy Sodalite Zeolite Membranes [Volume 1, Issue 4, 2014, Pages 209-214]
Vaezi, Mohammad Javad Nanostructured Palladium-Doped Silica Membrane Layer Synthesis for Hydrogen Separation: Effect of Activated Sublayers [Volume 6, Issue 1, 2019, Pages 1-9]
Vuorinen, Esa Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]

Y

Yaghmaei, Soheila Modeling of Multi-population Microbial Fuel and Electrolysis Cells Based on the Bioanode Potential Conditions [Volume 1, Issue 4, 2014, Pages 247-260]
Yaghmaei, Soheila A comparative study of three types of anode electrodes in a microfluidic microbial fuel cell [Volume 8, Issue 1, 2021, Pages 13-21]
Yahyanezhad Gele, Maede A comparative study of three types of anode electrodes in a microfluidic microbial fuel cell [Volume 8, Issue 1, 2021, Pages 13-21]
Yaldagard, Maryam Buckypaper-based catalytic electrode containing graphene nanoplates and ZrO2 nanorod composite to improve PEMFC performance [Volume 5, Issue 1, 2018, Pages 57-69]
Yaldagard, Maryam Green in-situ Fabrication of PtW/Poly Ethylen Dioxy Thiophene/Graphene Nanoplates/Gas Diffusion Layer (PtW/ PEDOT /GNP/GDL) Electrode and its Electrocatalytic Property for Direct Methanol Fuel Cells Application [Volume 6, Issue 1, 2019, Pages 39-58]
Yaldagard, Maryam Synthesis and electrochemical characterization of Graphene-Polyallylamine Nanocomposites as a New Supports of Pt Catalyst for Direct Methanol Fuel Cell Application [Volume 6, Issue 2, 2019, Pages 141-161]
Yaldagard, Maryam Ethanol electro-oxidation on Pt/CNFs-GNPs/GDL electrode for fuel cell application [Volume 9, Issue 1, 2022, Pages 69-85]
Yasari, Elham Prediction the hydrogen adsorption isotherm on nickel decorated carbon nanotubes by applying artificial neural network modeling [Volume 8, Issue 2, 2021, Pages 61-68]
Yazdani, Hamid Integration of a Vanadium Redox Flow Battery with a Proton Exchange Membrane Fuel Cell as an Energy Storage System [Volume 4, Issue 1, 2017, Pages 53-68]
Yazdanshenas, Rahil Single walled carbon nanotube in the reaction layer of gas diffusion electrode for oxygen reduction reaction [Volume 1, Issue 2, 2014, Pages 75-82]
Youneszadeh, Reza Experimental Investigation of a High Efficiency Power Path Controller for PEM Fuel Cell and Battery Hybrid System [Volume 9, Issue 2, 2022, Pages 149-161]
Youneszadeh, Reza Fuel Cell Power System Conceptual Design for Unmanned Underwater Vehicle [Volume 10, Issue 1, 2023, Pages 33-50]
Yousefi, Vajihe Implementation of Chitosan modified ultrafiltration hollow fiber as proton exchange membrane of ml-scale microbial fuel cells [Volume 10, Issue 4, 2023, Pages 299-310]

Z

Zaherian, AmirAli Optimization of the preparation procedure of Ni/Al2O3 catalyst for steam reforming of n-butane [Volume 2, Issue 3, 2015, Pages 139-149]
Zamani, Mohammad Reza Numerical-experimental study on the Failure Behavior of Graphite-Based Composite Bipolar Plate for PEM fuel cells [Volume 9, Issue 2, 2022, Pages 107-116]
Zandi Atashbar, Navid Application of Pd-Substituted Ni-Al Layered Double Hydroxides for the Hydrogen Evolution Reaction [Volume 2, Issue 4, 2015, Pages 253-261]
Zareei, Javad Theoretical study of the effect of hydrogen addition to natural gas-fueled direct-injection engines [Volume 1, Issue 1, 2014, Pages 11-20]
Zareii, Mojtaba "Physical properties and electronic structure of LaNi5 compound before and after hydrogenation: An experimental and theoretical approach" [Volume 1, Issue 1, 2014, Pages 27-39]
Zare Mehrjardi, Hamid Reza Evaluation of electrocatalytic performance of PtCo/C nanoparticles in different proportions of cobalt for oxygen reduction reaction [Volume 10, Issue 4, 2023, Pages 291-297]
Ziaei-Rad, Masoud Parametric study of the influence of cooling channel dimensions on PEM fuel cell thermal performance [Volume 4, Issue 4, 2017, Pages 265-274]
Ziarati, mahmoud Hydrogen production via steam reforming of LPG on Ni/Zeolite catalysts [Volume 1, Issue 4, 2014, Pages 233-238]
Ziarati, Mahmoud Optimization of the preparation procedure of Ni/Al2O3 catalyst for steam reforming of n-butane [Volume 2, Issue 3, 2015, Pages 139-149]
Zolfaghari, Alireza Determination of thermodynamic parameters of hydrogen permeation of palladium membrane for considering the effect of stainless steel support [Volume 1, Issue 1, 2014, Pages 1-10]