Keyword Index

A

  • Abaqus FEM software Modeling and experimental study on the sealing gasket of proton exchange membrane fuel cells [Volume 3, Issue 3, 2016, Pages 213-220]
  • Acidic media Ethanol electrooxidation on the Co@Pt core-shell nanoparticles modified carbon-ceramic electrode in acidic and alkaline media [Volume 3, Issue 1, 2016, Pages 19-31]
  • Activated transport Nanostructured Palladium-Doped Silica Membrane Layer Synthesis for Hydrogen Separation: Effect of Activated Sublayers [Volume 6, Issue 1, 2019, Pages 1-9]
  • Adaptive Hierarchical Control Strategy of Heat and Power for Zero Energy Buildings including Hybrid Fuel Cell/Photovoltaic Power Sources and Plug-in Electric Vehicle [Volume 3, Issue 1, 2016, Pages 33-44]
  • Ag/TNT nanocomposite Optimization of Ag loaded TiO2 nanotube arrays for plasmonic photoelectrochemical water splitting [Volume 6, Issue 2, 2019, Pages 133-140]
  • AISI 316L Stainless Steel Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
  • Alanate Density Functional Studies on Crystal Structure and electronic properties of Potassium Alanate as a candidate for Hydrogen storage [Volume 2, Issue 3, 2015, Pages 169-179]
  • Alkaline direct glucose fuel cells Electrocatalytic oxidation of glucose on the modified carbon paste electrode with sodalite nanozeolite for fuel cell [Volume 2, Issue 1, 2015, Pages 47-58]
  • Alkaline fuel cell A Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System [Volume 1, Issue 4, 2014, Pages 223-231]
  • Alkaline media Ethanol electrooxidation on the Co@Pt core-shell nanoparticles modified carbon-ceramic electrode in acidic and alkaline media [Volume 3, Issue 1, 2016, Pages 19-31]
  • Alkaline media Ni@Pt core-shell nanoparticles as an improved electrocatalyst for ethanol electrooxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 109-119]
  • Amination Agents Investigation of ion transport and water content properties in anion exchange membranes based on polysulfone for solid alkaline fuel cell application [Volume 2, Issue 1, 2015, Pages 13-25]
  • ANFIS Finite Element Simulation and ANFIS Prediction of Dimensional Error Effect on distribution of BPP/GDL Contact Pressure in PEM Fuel Cell [Volume 4, Issue 2, 2017, Pages 125-138]
  • Anion Exchange Membrane Investigation of ion transport and water content properties in anion exchange membranes based on polysulfone for solid alkaline fuel cell application [Volume 2, Issue 1, 2015, Pages 13-25]
  • Annular geometry The simulation of novel annular shape on the Performance in Proton Exchange Membrane Fuel Cell [Volume 1, Issue 3, 2014, Pages 175-188]
  • Anode potential Modeling of Multi-population Microbial Fuel and Electrolysis Cells Based on the Bioanode Potential Conditions [Volume 1, Issue 4, 2014, Pages 247-260]
  • Anode product recycling Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
  • Anode-supported Three-dimensional modeling of transport phenomena in a planar anode-supported solid oxide fuel cell [Volume 4, Issue 1, 2017, Pages 37-52]
  • Applied voltage The significance of key operational variables to the enhancement of hydrogen production in a single-chamber microbial electrolysis cell (MEC) [Volume 2, Issue 2, 2015, Pages 85-97]
  • Au (100) Interaction of atomic hydrogen with monometallic Au(100), Cu(100), Pt(100) surfaces and surface of bimetallic Au@Cu(100), Au@Pt(100) overlayer systems: The role of magnetism [Volume 4, Issue 3, 2017, Pages 209-218]

B

  • Batch process Effect of batch vs. continuous mode of operation on microbial desalination cell performance treating municipal wastewater [Volume 3, Issue 4, 2016, Pages 281-290]
  • Biomass Gasification Energy Price Analysis of a Biomass Gasification-Solid Oxide Fuel Cell-Gas Turbine Power Plant [Volume 3, Issue 1, 2016, Pages 45-58]
  • Bipolar Plates Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
  • Buckypaper electrode Buckypaper-based catalytic electrode containing graphene nanoplates and ZrO2 nanorod composite to improve PEMFC performance [Volume 5, Issue 1, 2018, Pages 57-69]

C

  • Carbon black Application of Pd-Substituted Ni-Al Layered Double Hydroxides for the Hydrogen Evolution Reaction [Volume 2, Issue 4, 2015, Pages 253-261]
  • Carbon-ceramic electrode Platinum nanoparticles/functionalized carbon nanoparticles composites supported on the carbon-ceramic electrode and their electroactivity for ethanol oxidation [Volume 5, Issue 1, 2018, Pages 35-47]
  • Cascade type stack Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
  • Cascade type stack Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
  • Catalyst Palladium nanoparticles supported on carbon black powder as an effective anodic catalyst for application in a direct glucose alkaline fuel cell [Volume 3, Issue 1, 2016, Pages 11-17]
  • Catalyst Layer Numerical study on the performance prediction of a proton exchange membrane (PEM) fuel cell [Volume 4, Issue 4, 2017, Pages 249-263]
  • Catalyst Layer (CL) A review of the main mechanisms of catalyst layer degradation in polymer electrolyte membrane fuel cell (PEMFC) and different performance recovery methods [Volume 6, Issue 2, 2019, Pages 91-115]
  • Catalytic Partial Oxidation (CPOX) An Experimental Investigation on Simultaneous Effects of Oxygen Ratio and Flow-Rate in SOFCs Performance Fueled by a Mixture of Methane and Oxygen [Volume 6, Issue 1, 2019, Pages 11-22]
  • Cathode product recycling Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
  • Cathodes La0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study [Volume 1, Issue 4, 2014, Pages 239-246]
  • Cathodic treatment Kinetic study of CO desorption from cathodic electrochemically treated carbon paper supported Pt electrodes [Volume 4, Issue 3, 2017, Pages 201-207]
  • CeO2 Synthesis and Characterization of Co-doped CeO2 Ceramic Electrolyte for IT-SOFC [(Articles in Press)]
  • Ceria Optimization of Preparation Factors for Cerium Oxide Synthesis as a Support for CO PrOx Catalyst [Volume 1, Issue 3, 2014, Pages 189-197]
  • CFD Performance Improvement of PEM Fuel Cells Using Air Channel Indentation; Part I: Mechanisms to Enrich Oxygen Concentration in Catalyst Layer [Volume 1, Issue 4, 2014, Pages 199-207]
  • CFD Numerical analysis of reactant transport in the novel tubular polymer electrolyte membrane fuel cells [Volume 2, Issue 3, 2015, Pages 181-196]
  • CFD Generalization of a CFD Model to Predict the Net Power in PEM Fuel Cells [Volume 6, Issue 1, 2019, Pages 23-37]
  • CFD model Reforming Integrated with Oxidation in Micro-Heat Exchanger Reactor with Circular Micro-Channels [Volume 1, Issue 2, 2014, Pages 65-74]
  • CFD simulation Transient Three-dimensional Simulation of a Metal Hydride Hydrogen Storage Tank Interconnected to a PEM Fuel Cell by Heat Pipes [Volume 6, Issue 2, 2019, Pages 117-132]
  • Channel Modeling heat and mass transfer in laminar forced flow between parallel plates channel imposed to suction or injection [Volume 2, Issue 1, 2015, Pages 35-46]
  • Channel Indentation Performance Improvement of PEM Fuel Cells Using Air Channel Indentation; Part I: Mechanisms to Enrich Oxygen Concentration in Catalyst Layer [Volume 1, Issue 4, 2014, Pages 199-207]
  • CHP Performance assessment of a SOFC cogeneration system for residential buildings located in eastern Iran [Volume 3, Issue 2, 2016, Pages 81-97]
  • Clamping pressure Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior [Volume 3, Issue 1, 2016, Pages 1-10]
  • CO2 A comparative study on the kinetics of carbon dioxide methanation over bimetallic and monometallic catalysts [Volume 3, Issue 1, 2016, Pages 59-71]
  • CO2 capture Investigation of carbon dioxide capture from hydrogen using the thermal pressure swing adsorption process: Central composite design modeling [Volume 4, Issue 1, 2017, Pages 13-26]
  • CO2 reforming Effect of K2O on the catalytic performance of Ni catalysts supported on nanocrystalline Al2O3 in CO2 reforming of methane [Volume 2, Issue 4, 2015, Pages 215-226]
  • Co3O4 coating Co3O4 spinel protection coating for solid oxide fuel cell interconnect application [Volume 1, Issue 2, 2014, Pages 121-131]
  • Co-doped graphene Facile Synthesis of N, S-Doped Graphene from Sulfur Trioxide Pyridine Precursor for the Oxygen Reduction Reaction [Volume 4, Issue 3, 2017, Pages 231-240]
  • CO electro-oxidation Enhancing the CO tolerance of Pt/C as PEM fuel cell anode catalyst by modifying the catalyst synthesis method [Volume 6, Issue 1, 2019, Pages 71-81]
  • Commercial zirconia Hydrothermal synthesis of nano-size zirconia using commercial zirconia powder: process optimization through response surface methodology [Volume 1, Issue 3, 2014, Pages 163-173]
  • Composite electrodes Effect of temperature on kinetics of the hydrogen evolution reaction on Ni-P-C cathodes in alkaline solution [Volume 1, Issue 4, 2014, Pages 215-222]
  • Continuous process Effect of batch vs. continuous mode of operation on microbial desalination cell performance treating municipal wastewater [Volume 3, Issue 4, 2016, Pages 281-290]
  • CO Poisoning Effect of CO in the reformatted fuel on the performance of Polymer Electrolyte Membrane (PEM) fuel cell [Volume 4, Issue 2, 2017, Pages 153-165]
  • CO Poisoning Kinetic study of CO desorption from cathodic electrochemically treated carbon paper supported Pt electrodes [Volume 4, Issue 3, 2017, Pages 201-207]
  • Copper-Nickel powder Morphological and physical study of Cu-Ni sintered porous wicks used in heat pipes and fuel cells [Volume 3, Issue 4, 2016, Pages 255-266]
  • Co-precipitation La0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study [Volume 1, Issue 4, 2014, Pages 239-246]
  • Co- precipitation Methanol steam reforming; Effects of various metal oxides on the properties of a Cu-based catalyst [Volume 3, Issue 4, 2016, Pages 291-299]
  • CO Preferential Oxidation Effect of platinum on Ceria supported Cu catalysts for PrOx process in fuel processors [Volume 1, Issue 1, 2014, Pages 1-100]
  • CO PrOx Optimization of Preparation Factors for Cerium Oxide Synthesis as a Support for CO PrOx Catalyst [Volume 1, Issue 3, 2014, Pages 189-197]
  • Co@Pt nanoparticles Ethanol electrooxidation on the Co@Pt core-shell nanoparticles modified carbon-ceramic electrode in acidic and alkaline media [Volume 3, Issue 1, 2016, Pages 19-31]
  • Core-shell Ni@Pt core-shell nanoparticles as an improved electrocatalyst for ethanol electrooxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 109-119]
  • Core-shell Ethanol electrooxidation on the Co@Pt core-shell nanoparticles modified carbon-ceramic electrode in acidic and alkaline media [Volume 3, Issue 1, 2016, Pages 19-31]
  • Cost model A Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System [Volume 1, Issue 4, 2014, Pages 223-231]
  • Crossover Numerical investigation of methanol crossover through the membrane in a direct methanol fuel cell [Volume 5, Issue 1, 2018, Pages 21-33]
  • Cu (100) Interaction of atomic hydrogen with monometallic Au(100), Cu(100), Pt(100) surfaces and surface of bimetallic Au@Cu(100), Au@Pt(100) overlayer systems: The role of magnetism [Volume 4, Issue 3, 2017, Pages 209-218]
  • Cu-based catalyst Methanol steam reforming; Effects of various metal oxides on the properties of a Cu-based catalyst [Volume 3, Issue 4, 2016, Pages 291-299]
  • Cu catalysts Effect of platinum on Ceria supported Cu catalysts for PrOx process in fuel processors [Volume 1, Issue 1, 2014, Pages 1-100]
  • CuO-ZnO-Al2O3 Effect of Sorbitol/Oxidizer Ratio on Microwave Assisted Solution Combustion Synthesis of Copper Based Nanocatalyst for Fuel Cell Grade Hydrogen Production [Volume 2, Issue 4, 2015, Pages 227-240]
  • Cyclic voltammetry Enhancing the CO tolerance of Pt/C as PEM fuel cell anode catalyst by modifying the catalyst synthesis method [Volume 6, Issue 1, 2019, Pages 71-81]

D

  • Dead-end Operation Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
  • Degradation A review of the main mechanisms of catalyst layer degradation in polymer electrolyte membrane fuel cell (PEMFC) and different performance recovery methods [Volume 6, Issue 2, 2019, Pages 91-115]
  • Dehydration Temperature Effect of Dehydration Temperature on the H2 Separation Potential of Hydroxy Sodalite Zeolite Membranes [Volume 1, Issue 4, 2014, Pages 209-214]
  • Density Functional Theory "Physical properties and electronic structure of LaNi5 compound before and after hydrogenation: An experimental and theoretical approach" [Volume 1, Issue 1, 2014, Pages 27-39]
  • Density Functional Theory Density Functional Studies on Crystal Structure and electronic properties of Potassium Alanate as a candidate for Hydrogen storage [Volume 2, Issue 3, 2015, Pages 169-179]
  • Developing flow Modeling heat and mass transfer in laminar forced flow between parallel plates channel imposed to suction or injection [Volume 2, Issue 1, 2015, Pages 35-46]
  • DFT Interaction of atomic hydrogen with monometallic Au(100), Cu(100), Pt(100) surfaces and surface of bimetallic Au@Cu(100), Au@Pt(100) overlayer systems: The role of magnetism [Volume 4, Issue 3, 2017, Pages 209-218]
  • Direct glucose alkaline fuel cell (DGAFC) Palladium nanoparticles supported on carbon black powder as an effective anodic catalyst for application in a direct glucose alkaline fuel cell [Volume 3, Issue 1, 2016, Pages 11-17]
  • Direct methanol fuel cell Numerical investigation of methanol crossover through the membrane in a direct methanol fuel cell [Volume 5, Issue 1, 2018, Pages 21-33]
  • Direct Methanol Fuel Cell (DMFC) Green in-situ Fabrication of PtW/Poly Ethylen Dioxy Thiophene/Graphene Nanoplates/Gas Diffusion Layer (PtW/ PEDOT /GNP/GDL) Electrode and its Electrocatalytic Property for Direct Methanol Fuel Cells Application [Volume 6, Issue 1, 2019, Pages 39-58]
  • Direct methanol Fuel cells Preparation and Characterization of Electrocatalyst Nanoparticles for Direct Methanol Fuel Cell Applications Using β-D-glucose as Protection Agent [Volume 4, Issue 1, 2017, Pages 1-11]
  • Direct reforming An Experimental Investigation on Simultaneous Effects of Oxygen Ratio and Flow-Rate in SOFCs Performance Fueled by a Mixture of Methane and Oxygen [Volume 6, Issue 1, 2019, Pages 11-22]
  • DMFC Numerical investigation of methanol crossover through the membrane in a direct methanol fuel cell [Volume 5, Issue 1, 2018, Pages 21-33]
  • Doped zinc oxide Electrochemical evaluation of electrodeposited platinum on a modified carbon substrate with cobalt, nickel and copper doped zinc oxide for the methanol oxidation reaction [Volume 5, Issue 1, 2018, Pages 49-55]
  • Dry reforming Investigation of the catalytic performance and coke formation of nanocrystalline Ni/SrO-Al2O3 catalyst in dry reforming of methane [Volume 3, Issue 4, 2016, Pages 315-322]
  • Dynamic Dynamic investigation of hydrocarbon proton exchange membrane Fuel Cell [Volume 4, Issue 3, 2017, Pages 219-230]
  • Dynamic modeling Investigation of vessels pressure effect on PEM electrolyzer performance by using a new OneDimensional Dynamic Model [Volume 2, Issue 4, 2015, Pages 271-281]
  • Dynamics Simulation New Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell [Volume 2, Issue 4, 2015, Pages 241-252]

E

  • Economic Modelling Energy Price Analysis of a Biomass Gasification-Solid Oxide Fuel Cell-Gas Turbine Power Plant [Volume 3, Issue 1, 2016, Pages 45-58]
  • Electocatalyst Preparation and Characterization of Electrocatalyst Nanoparticles for Direct Methanol Fuel Cell Applications Using β-D-glucose as Protection Agent [Volume 4, Issue 1, 2017, Pages 1-11]
  • Electrical resistance Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior [Volume 3, Issue 1, 2016, Pages 1-10]
  • Electrocatalyst Platinum nanoparticles/functionalized carbon nanoparticles composites supported on the carbon-ceramic electrode and their electroactivity for ethanol oxidation [Volume 5, Issue 1, 2018, Pages 35-47]
  • Electrocatalyst Electrochemical evaluation of electrodeposited platinum on a modified carbon substrate with cobalt, nickel and copper doped zinc oxide for the methanol oxidation reaction [Volume 5, Issue 1, 2018, Pages 49-55]
  • Electrochemical impedance spectroscopy Effect of temperature on kinetics of the hydrogen evolution reaction on Ni-P-C cathodes in alkaline solution [Volume 1, Issue 4, 2014, Pages 215-222]
  • Electrochemical impedance spectroscopy In situ activation of a Ni catalyst with Mo ion for hydrogen evolution reaction in alkaline solution [Volume 3, Issue 2, 2016, Pages 151-158]
  • Electrochemical Impedance Spectroscopy (EIS) Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
  • Electrochemical Impedance Spectroscopy (EIS) Preparation of Ni-P-CeO2 electrode and study on electrocatalytic properties for hydrogen evolution reaction [Volume 5, Issue 1, 2018, Pages 1-11]
  • Electrochemical model Development and Simulation of a PEM Fuel Cell model for Prediction of Water Content and Power Generation [Volume 4, Issue 4, 2017, Pages 289-299]
  • Electroless plating technique Palladium composite membrane with high reversibility of CO2 poisoning [Volume 5, Issue 1, 2018, Pages 13-19]
  • Electrolysis Investigation of vessels pressure effect on PEM electrolyzer performance by using a new OneDimensional Dynamic Model [Volume 2, Issue 4, 2015, Pages 271-281]
  • Electrooxidation Electrocatalytic oxidation of glucose on the modified carbon paste electrode with sodalite nanozeolite for fuel cell [Volume 2, Issue 1, 2015, Pages 47-58]
  • Electrooxidation Ni@Pt core-shell nanoparticles as an improved electrocatalyst for ethanol electrooxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 109-119]
  • Electrophoretic deposition Electrophoretic deposition of MnCr2O4 coating for solid oxide fuel cell metallic interconnects [Volume 1, Issue 1, 2014, Pages 21-26]
  • Electrophoretic deposition Co3O4 spinel protection coating for solid oxide fuel cell interconnect application [Volume 1, Issue 2, 2014, Pages 121-131]
  • End plate Design and Investigation of Honeycomb End Plates for PEM Fuel Cells [Volume 4, Issue 3, 2017, Pages 189-199]
  • Energy efficiency A Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System [Volume 1, Issue 4, 2014, Pages 223-231]
  • Energy efficiency Simulation of a Solid Oxide Fuel Cell with External Steam Methane Reforming and Bypass [Volume 4, Issue 2, 2017, Pages 103-118]
  • Energy Management Energy Management Simulation in a PEM Fuel Cell System [Volume 2, Issue 1, 2015, Pages 1-6]
  • Energy Price Energy Price Analysis of a Biomass Gasification-Solid Oxide Fuel Cell-Gas Turbine Power Plant [Volume 3, Issue 1, 2016, Pages 45-58]
  • Energy Storage Hierarchical Control Strategy of Heat and Power for Zero Energy Buildings including Hybrid Fuel Cell/Photovoltaic Power Sources and Plug-in Electric Vehicle [Volume 3, Issue 1, 2016, Pages 33-44]
  • Energy Storage System Integration of a Vanadium Redox Flow Battery with a Proton Exchange Membrane Fuel Cell as an Energy Storage System [Volume 4, Issue 1, 2017, Pages 53-68]
  • Enthalpy of hydrogen dissolution Determination of thermodynamic parameters of hydrogen permeation of palladium membrane for considering the effect of stainless steel support [Volume 1, Issue 1, 2014, Pages 1-10]
  • Ethanol Ni@Pt core-shell nanoparticles as an improved electrocatalyst for ethanol electrooxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 109-119]
  • Ethanol Ethanol electrooxidation on the Co@Pt core-shell nanoparticles modified carbon-ceramic electrode in acidic and alkaline media [Volume 3, Issue 1, 2016, Pages 19-31]
  • Ethanol oxidation Platinum nanoparticles/functionalized carbon nanoparticles composites supported on the carbon-ceramic electrode and their electroactivity for ethanol oxidation [Volume 5, Issue 1, 2018, Pages 35-47]
  • Exergy Performance assessment of a SOFC cogeneration system for residential buildings located in eastern Iran [Volume 3, Issue 2, 2016, Pages 81-97]
  • Exergy Efficiency Exergy Analysis of a Molten Carbonate Fuel Cell-Turbo Expander-Steam Turbine Hybrid Cycle [Volume 3, Issue 4, 2016, Pages 267-279]

F

  • Fe Study the stability of Si, Ge, Fe and Co in the interior surface of metallic carbon nanotube for hydrogen storage [Volume 2, Issue 3, 2015, Pages 197-205]
  • Finite Volume Investigation of vessels pressure effect on PEM electrolyzer performance by using a new OneDimensional Dynamic Model [Volume 2, Issue 4, 2015, Pages 271-281]
  • Fixed Bed Reactors Hydrogen production by steam reforming of dimethyle ether over Cu/ZnO/Al2O3 and H-ZSM-5 catalysts: An experimental and modeling study [Volume 1, Issue 3, 2014, Pages 153-161]
  • Flooding drying Development and Simulation of a PEM Fuel Cell model for Prediction of Water Content and Power Generation [Volume 4, Issue 4, 2017, Pages 289-299]
  • Flow Field Design Generalization of a CFD Model to Predict the Net Power in PEM Fuel Cells [Volume 6, Issue 1, 2019, Pages 23-37]
  • Fuel cell performance The effect of inclined radial flow in proton exchange membrane fuel cells performance [Volume 1, Issue 3, 2014, Pages 141-152]
  • Fuel Cells Generalization of a CFD Model to Predict the Net Power in PEM Fuel Cells [Volume 6, Issue 1, 2019, Pages 23-37]
  • Fuel/Oxidizer Ratio Effect of Sorbitol/Oxidizer Ratio on Microwave Assisted Solution Combustion Synthesis of Copper Based Nanocatalyst for Fuel Cell Grade Hydrogen Production [Volume 2, Issue 4, 2015, Pages 227-240]
  • Fuzzy Control Hierarchical Control Strategy of Heat and Power for Zero Energy Buildings including Hybrid Fuel Cell/Photovoltaic Power Sources and Plug-in Electric Vehicle [Volume 3, Issue 1, 2016, Pages 33-44]

G

  • Galvanostatic Electrodeposition Green in-situ Fabrication of PtW/Poly Ethylen Dioxy Thiophene/Graphene Nanoplates/Gas Diffusion Layer (PtW/ PEDOT /GNP/GDL) Electrode and its Electrocatalytic Property for Direct Methanol Fuel Cells Application [Volume 6, Issue 1, 2019, Pages 39-58]
  • Gas Diffusion Lattice Boltzmann modeling of two component gas diffusion in solid oxide fuel cell [Volume 2, Issue 4, 2015, Pages 263-270]
  • Gas Diffusion Layer Numerical study on the performance prediction of a proton exchange membrane (PEM) fuel cell [Volume 4, Issue 4, 2017, Pages 249-263]
  • Gas Flow Lattice Boltzmann modeling of two component gas diffusion in solid oxide fuel cell [Volume 2, Issue 4, 2015, Pages 263-270]
  • Gas turbine Energy Price Analysis of a Biomass Gasification-Solid Oxide Fuel Cell-Gas Turbine Power Plant [Volume 3, Issue 1, 2016, Pages 45-58]
  • Gas turbine Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
  • Gas turbine Multi-objective optimization of two hybrid power generation systems for optimum selection of SOFC reactants heat exchangers mid-temperatures [Volume 4, Issue 3, 2017, Pages 175-188]
  • GDL contact pressure Finite Element Simulation and ANFIS Prediction of Dimensional Error Effect on distribution of BPP/GDL Contact Pressure in PEM Fuel Cell [Volume 4, Issue 2, 2017, Pages 125-138]
  • Genetic algorithm Modeling of measurement error in refractive index determination of fuel cell using neural network and genetic algorithm [Volume 1, Issue 2, 2014, Pages 95-104]
  • Geobacter sulfurreducens PCA The significance of key operational variables to the enhancement of hydrogen production in a single-chamber microbial electrolysis cell (MEC) [Volume 2, Issue 2, 2015, Pages 85-97]
  • Glassy carbon electrode (GCE) Palladium nanoparticles supported on carbon black powder as an effective anodic catalyst for application in a direct glucose alkaline fuel cell [Volume 3, Issue 1, 2016, Pages 11-17]
  • Glucose Electrocatalytic oxidation of glucose on the modified carbon paste electrode with sodalite nanozeolite for fuel cell [Volume 2, Issue 1, 2015, Pages 47-58]
  • Graphene Synthesis of Supported Pt Alloy three Dimensional Rhombus Shapes Nanoparticles for Oxygen Reduction Reaction [Volume 2, Issue 2, 2015, Pages 121-130]
  • Graphene Synthesis and electrochemical characterization of Graphene-Polyallylamine Nanocomposites as a New Supports of Pt Catalyst for Direct Methanol Fuel Cell Application [(Articles in Press)]
  • Graphene Oxide Electrochemical Study of Hydrogen Adsorption/Reduction (HAR) Reaction on Graphene Oxide as Electrocatalyst for Proton Exchange Membrane Fuel Cells [Volume 2, Issue 2, 2015, Pages 99-107]

H

  • H2 production The effect of solvent of titanium precursor in the sol-gel process on the activity of TiO2 nanoparticles for H2 production [Volume 4, Issue 2, 2017, Pages 139-151]
  • HAR reaction Electrochemical Study of Hydrogen Adsorption/Reduction (HAR) Reaction on Graphene Oxide as Electrocatalyst for Proton Exchange Membrane Fuel Cells [Volume 2, Issue 2, 2015, Pages 99-107]
  • Heat and mass transfer Modeling heat and mass transfer in laminar forced flow between parallel plates channel imposed to suction or injection [Volume 2, Issue 1, 2015, Pages 35-46]
  • Heat of formation "Physical properties and electronic structure of LaNi5 compound before and after hydrogenation: An experimental and theoretical approach" [Volume 1, Issue 1, 2014, Pages 27-39]
  • Heat pipes Transient Three-dimensional Simulation of a Metal Hydride Hydrogen Storage Tank Interconnected to a PEM Fuel Cell by Heat Pipes [Volume 6, Issue 2, 2019, Pages 117-132]
  • Heat Recovery Simulation of a Solid Oxide Fuel Cell with External Steam Methane Reforming and Bypass [Volume 4, Issue 2, 2017, Pages 103-118]
  • Heat transfer A Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System [Volume 1, Issue 4, 2014, Pages 223-231]
  • Heterodyne interferometer Modeling of measurement error in refractive index determination of fuel cell using neural network and genetic algorithm [Volume 1, Issue 2, 2014, Pages 95-104]
  • Honeycomb Design and Investigation of Honeycomb End Plates for PEM Fuel Cells [Volume 4, Issue 3, 2017, Pages 189-199]
  • Hybrid Cycle Exergy Analysis of a Molten Carbonate Fuel Cell-Turbo Expander-Steam Turbine Hybrid Cycle [Volume 3, Issue 4, 2016, Pages 267-279]
  • Hybrid Power Control Photovoltaic & Fuel Cell Hierarchical Control Strategy of Heat and Power for Zero Energy Buildings including Hybrid Fuel Cell/Photovoltaic Power Sources and Plug-in Electric Vehicle [Volume 3, Issue 1, 2016, Pages 33-44]
  • Hybrid system Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
  • Hybrid system Energy and economic comparison of SOFC-GT, MCFC-GT, and SOFC-MCFC-GT hybrid systems [Volume 4, Issue 4, 2017, Pages 275-287]
  • Hydriding kinetic "Physical properties and electronic structure of LaNi5 compound before and after hydrogenation: An experimental and theoretical approach" [Volume 1, Issue 1, 2014, Pages 27-39]
  • Hydriding kinetic Synthesis, characterization and hydrogen storage properties of Mm(Ni,Co,Mn,Al)5 alloy [Volume 1, Issue 2, 2014, Pages 83-94]
  • Hydrocarbon proton exchange membrane Dynamic investigation of hydrocarbon proton exchange membrane Fuel Cell [Volume 4, Issue 3, 2017, Pages 219-230]
  • Hydrogen Theoretical study of the effect of hydrogen addition to natural gas-fueled direct-injection engines [Volume 1, Issue 1, 2014, Pages 11-20]
  • Hydrogen Effect of Sorbitol/Oxidizer Ratio on Microwave Assisted Solution Combustion Synthesis of Copper Based Nanocatalyst for Fuel Cell Grade Hydrogen Production [Volume 2, Issue 4, 2015, Pages 227-240]
  • Hydrogen Influence of unsuitable operational conditions on the transient performance of a small hydrogen liquefier [Volume 3, Issue 3, 2016, Pages 199-212]
  • Hydrogen Methanol steam reforming; Effects of various metal oxides on the properties of a Cu-based catalyst [Volume 3, Issue 4, 2016, Pages 291-299]
  • Hydrogen adsorption Interaction of atomic hydrogen with monometallic Au(100), Cu(100), Pt(100) surfaces and surface of bimetallic Au@Cu(100), Au@Pt(100) overlayer systems: The role of magnetism [Volume 4, Issue 3, 2017, Pages 209-218]
  • Hydrogen and electricity The significance of key operational variables to the enhancement of hydrogen production in a single-chamber microbial electrolysis cell (MEC) [Volume 2, Issue 2, 2015, Pages 85-97]
  • Hydrogen evolution reaction Application of Pd-Substituted Ni-Al Layered Double Hydroxides for the Hydrogen Evolution Reaction [Volume 2, Issue 4, 2015, Pages 253-261]
  • Hydrogen evolution reaction In situ activation of a Ni catalyst with Mo ion for hydrogen evolution reaction in alkaline solution [Volume 3, Issue 2, 2016, Pages 151-158]
  • Hydrogen evolution reaction (HER) Effect of temperature on kinetics of the hydrogen evolution reaction on Ni-P-C cathodes in alkaline solution [Volume 1, Issue 4, 2014, Pages 215-222]
  • Hydrogen evolution reaction (HER) Preparation of Ni-P-CeO2 electrode and study on electrocatalytic properties for hydrogen evolution reaction [Volume 5, Issue 1, 2018, Pages 1-11]
  • Hydrogen production Hydrogen production by steam reforming of dimethyle ether over Cu/ZnO/Al2O3 and H-ZSM-5 catalysts: An experimental and modeling study [Volume 1, Issue 3, 2014, Pages 153-161]
  • Hydrogen production Hydrogen production via steam reforming of LPG on Ni/Zeolite catalysts [Volume 1, Issue 4, 2014, Pages 233-238]
  • Hydrogen production Investigation of vessels pressure effect on PEM electrolyzer performance by using a new OneDimensional Dynamic Model [Volume 2, Issue 4, 2015, Pages 271-281]
  • Hydrogen production rate The significance of key operational variables to the enhancement of hydrogen production in a single-chamber microbial electrolysis cell (MEC) [Volume 2, Issue 2, 2015, Pages 85-97]
  • Hydrogen purification Effect of platinum on Ceria supported Cu catalysts for PrOx process in fuel processors [Volume 1, Issue 1, 2014, Pages 1-100]
  • Hydrogen purification Preparation of Pd composite membrane via organic-inorganic activation method in electroless plating technique [Volume 2, Issue 3, 2015, Pages 151-158]
  • Hydrogen purification Investigation of carbon dioxide capture from hydrogen using the thermal pressure swing adsorption process: Central composite design modeling [Volume 4, Issue 1, 2017, Pages 13-26]
  • Hydrogen Separation Effect of Dehydration Temperature on the H2 Separation Potential of Hydroxy Sodalite Zeolite Membranes [Volume 1, Issue 4, 2014, Pages 209-214]
  • Hydrogen Separation Nanostructured Palladium-Doped Silica Membrane Layer Synthesis for Hydrogen Separation: Effect of Activated Sublayers [Volume 6, Issue 1, 2019, Pages 1-9]
  • Hydrogen Separation Silica membrane performance for hydrogen separation from methanol steam reforming products: Assessment of different multistage membrane schemes [Volume 6, Issue 1, 2019, Pages 59-70]
  • Hydrogen storage materials Density Functional Studies on Crystal Structure and electronic properties of Potassium Alanate as a candidate for Hydrogen storage [Volume 2, Issue 3, 2015, Pages 169-179]
  • Hydrothermal synthesis Hydrothermal synthesis of nano-size zirconia using commercial zirconia powder: process optimization through response surface methodology [Volume 1, Issue 3, 2014, Pages 163-173]
  • Hydroxy Sodalite Effect of Dehydration Temperature on the H2 Separation Potential of Hydroxy Sodalite Zeolite Membranes [Volume 1, Issue 4, 2014, Pages 209-214]

I

  • Impregnation reduction method Preparation and Characterization of Electrocatalyst Nanoparticles for Direct Methanol Fuel Cell Applications Using β-D-glucose as Protection Agent [Volume 4, Issue 1, 2017, Pages 1-11]
  • In situ activation In situ activation of a Ni catalyst with Mo ion for hydrogen evolution reaction in alkaline solution [Volume 3, Issue 2, 2016, Pages 151-158]
  • Interconnect Electrophoretic deposition of MnCr2O4 coating for solid oxide fuel cell metallic interconnects [Volume 1, Issue 1, 2014, Pages 21-26]
  • Internal Reforming Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
  • Isothermal Numerical investigation of methanol crossover through the membrane in a direct methanol fuel cell [Volume 5, Issue 1, 2018, Pages 21-33]

J

  • Joule-Thomson How to Design a Cryogenic Joule-Thomson Cooling System: Case Study of Small Hydrogen Liquefier [Volume 3, Issue 2, 2016, Pages 113-125]
  • Joule-Thomson Influence of unsuitable operational conditions on the transient performance of a small hydrogen liquefier [Volume 3, Issue 3, 2016, Pages 199-212]

K

  • Key words: Microbial fuel cell (MFC) Sulfurous Analysis of Bioelectricity Generation from Sulfate-reducing Bacteria (SRB) in a Microbial Fuel Cell [Volume 4, Issue 4, 2017, Pages 307-321]
  • Kinetics Desorption Kinetic study of CO desorption from cathodic electrochemically treated carbon paper supported Pt electrodes [Volume 4, Issue 3, 2017, Pages 201-207]

L

  • La2Ce2O7 nanoparticles Novel PVA/La2Ce2O7 hybrid nanocomposite membranes for application in proton exchange membrane fuel cells [Volume 1, Issue 2, 2014, Pages 105-112]
  • LaNi5 "Physical properties and electronic structure of LaNi5 compound before and after hydrogenation: An experimental and theoretical approach" [Volume 1, Issue 1, 2014, Pages 27-39]
  • Lattice Boltzmann Method Lattice Boltzmann modeling of two component gas diffusion in solid oxide fuel cell [Volume 2, Issue 4, 2015, Pages 263-270]
  • Layered double hydroxides Application of Pd-Substituted Ni-Al Layered Double Hydroxides for the Hydrogen Evolution Reaction [Volume 2, Issue 4, 2015, Pages 253-261]
  • Lithium-ion battery (LIB) A high performance lithium-ion battery using LiNa0.02K0.01FePO4/C as cathode material and anatase TiO2 nanotube arrays as anode material [Volume 4, Issue 1, 2017, Pages 27-35]
  • Lithium iron phosphate A high performance lithium-ion battery using LiNa0.02K0.01FePO4/C as cathode material and anatase TiO2 nanotube arrays as anode material [Volume 4, Issue 1, 2017, Pages 27-35]
  • LOX Tank Energy Management Simulation in a PEM Fuel Cell System [Volume 2, Issue 1, 2015, Pages 1-6]
  • LPG Hydrogen production via steam reforming of LPG on Ni/Zeolite catalysts [Volume 1, Issue 4, 2014, Pages 233-238]
  • LSCF La0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study [Volume 1, Issue 4, 2014, Pages 239-246]

M

  • Mathematics Modeling New Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell [Volume 2, Issue 4, 2015, Pages 241-252]
  • MCFC Energy and economic comparison of SOFC-GT, MCFC-GT, and SOFC-MCFC-GT hybrid systems [Volume 4, Issue 4, 2017, Pages 275-287]
  • MEA The effect of vertical injection of reactants to the membrane electrode assembly on the performance of a PEM fuel cell [Volume 3, Issue 3, 2016, Pages 167-182]
  • Membrane recovery Palladium composite membrane with high reversibility of CO2 poisoning [Volume 5, Issue 1, 2018, Pages 13-19]
  • Metal-free catalyst Facile Synthesis of N, S-Doped Graphene from Sulfur Trioxide Pyridine Precursor for the Oxygen Reduction Reaction [Volume 4, Issue 3, 2017, Pages 231-240]
  • Metal Hydride Energy Management Simulation in a PEM Fuel Cell System [Volume 2, Issue 1, 2015, Pages 1-6]
  • Metal hydride hydrogen storage Transient Three-dimensional Simulation of a Metal Hydride Hydrogen Storage Tank Interconnected to a PEM Fuel Cell by Heat Pipes [Volume 6, Issue 2, 2019, Pages 117-132]
  • Metal oxide Methanol steam reforming; Effects of various metal oxides on the properties of a Cu-based catalyst [Volume 3, Issue 4, 2016, Pages 291-299]
  • Methanation A comparative study on the kinetics of carbon dioxide methanation over bimetallic and monometallic catalysts [Volume 3, Issue 1, 2016, Pages 59-71]
  • Methane An Experimental Investigation on Simultaneous Effects of Oxygen Ratio and Flow-Rate in SOFCs Performance Fueled by a Mixture of Methane and Oxygen [Volume 6, Issue 1, 2019, Pages 11-22]
  • Methane Steam Reforming Simulation of a Solid Oxide Fuel Cell with External Steam Methane Reforming and Bypass [Volume 4, Issue 2, 2017, Pages 103-118]
  • Methanol oxidation reaction Electrochemical evaluation of electrodeposited platinum on a modified carbon substrate with cobalt, nickel and copper doped zinc oxide for the methanol oxidation reaction [Volume 5, Issue 1, 2018, Pages 49-55]
  • Methanol steam reforming Effect of Sorbitol/Oxidizer Ratio on Microwave Assisted Solution Combustion Synthesis of Copper Based Nanocatalyst for Fuel Cell Grade Hydrogen Production [Volume 2, Issue 4, 2015, Pages 227-240]
  • Methanol steam reforming Methanol steam reforming; Effects of various metal oxides on the properties of a Cu-based catalyst [Volume 3, Issue 4, 2016, Pages 291-299]
  • Microbial desalination cell Effect of batch vs. continuous mode of operation on microbial desalination cell performance treating municipal wastewater [Volume 3, Issue 4, 2016, Pages 281-290]
  • Microbial electrolysis cell Modeling of Multi-population Microbial Fuel and Electrolysis Cells Based on the Bioanode Potential Conditions [Volume 1, Issue 4, 2014, Pages 247-260]
  • Microbial electrolysis cell The significance of key operational variables to the enhancement of hydrogen production in a single-chamber microbial electrolysis cell (MEC) [Volume 2, Issue 2, 2015, Pages 85-97]
  • Microbial fuel cell Modeling of Multi-population Microbial Fuel and Electrolysis Cells Based on the Bioanode Potential Conditions [Volume 1, Issue 4, 2014, Pages 247-260]
  • Micro-Channel Reactor Steam Reforming Integrated with Oxidation of Methanol in a Micro-Channel Reactor with Different Micro-Baffle Shapes [Volume 2, Issue 2, 2015, Pages 75-83]
  • Microstructure optimization A new approach to microstructure optimization of solid oxide fuel cell electrodes [Volume 4, Issue 2, 2017, Pages 93-102]
  • Microwave Combustion Effect of Sorbitol/Oxidizer Ratio on Microwave Assisted Solution Combustion Synthesis of Copper Based Nanocatalyst for Fuel Cell Grade Hydrogen Production [Volume 2, Issue 4, 2015, Pages 227-240]
  • Mm(NiCoMnAl)5 alloy Synthesis, characterization and hydrogen storage properties of Mm(Ni,Co,Mn,Al)5 alloy [Volume 1, Issue 2, 2014, Pages 83-94]
  • Modeling Hydrogen production by steam reforming of dimethyle ether over Cu/ZnO/Al2O3 and H-ZSM-5 catalysts: An experimental and modeling study [Volume 1, Issue 3, 2014, Pages 153-161]
  • Modeling Modeling heat and mass transfer in laminar forced flow between parallel plates channel imposed to suction or injection [Volume 2, Issue 1, 2015, Pages 35-46]
  • Modeling Three-dimensional modeling of transport phenomena in a planar anode-supported solid oxide fuel cell [Volume 4, Issue 1, 2017, Pages 37-52]
  • Modeling Dynamic investigation of hydrocarbon proton exchange membrane Fuel Cell [Volume 4, Issue 3, 2017, Pages 219-230]
  • Modeling Silica membrane performance for hydrogen separation from methanol steam reforming products: Assessment of different multistage membrane schemes [Volume 6, Issue 1, 2019, Pages 59-70]
  • Modified carbon paste electrode Electrocatalytic oxidation of glucose on the modified carbon paste electrode with sodalite nanozeolite for fuel cell [Volume 2, Issue 1, 2015, Pages 47-58]
  • Molten Carbonate New Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell [Volume 2, Issue 4, 2015, Pages 241-252]
  • Molten Carbonate Fuel Cell Exergy Analysis of a Molten Carbonate Fuel Cell-Turbo Expander-Steam Turbine Hybrid Cycle [Volume 3, Issue 4, 2016, Pages 267-279]
  • Multi-Walled Carbon Nanotubes Multi-walled carbon nanotubes supported palladium nanoparticles: Synthesis, characterization and catalytic activity towards methanol electro oxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 67-74]

N

  • Nanocomposite Synthesis and electrochemical characterization of Graphene-Polyallylamine Nanocomposites as a New Supports of Pt Catalyst for Direct Methanol Fuel Cell Application [(Articles in Press)]
  • Nanocomposite membranes Novel PVA/La2Ce2O7 hybrid nanocomposite membranes for application in proton exchange membrane fuel cells [Volume 1, Issue 2, 2014, Pages 105-112]
  • Nanocrystalline Optimization of Preparation Factors for Cerium Oxide Synthesis as a Support for CO PrOx Catalyst [Volume 1, Issue 3, 2014, Pages 189-197]
  • Nanocrystalline Investigation of the catalytic performance and coke formation of nanocrystalline Ni/SrO-Al2O3 catalyst in dry reforming of methane [Volume 3, Issue 4, 2016, Pages 315-322]
  • Nano-sized catalyst Optimization of the preparation procedure of Ni/Al2O3 catalyst for steam reforming of n-butane [Volume 2, Issue 3, 2015, Pages 139-149]
  • Nano-size zirconia Hydrothermal synthesis of nano-size zirconia using commercial zirconia powder: process optimization through response surface methodology [Volume 1, Issue 3, 2014, Pages 163-173]
  • Nanostructured silica sublayers Nanostructured Palladium-Doped Silica Membrane Layer Synthesis for Hydrogen Separation: Effect of Activated Sublayers [Volume 6, Issue 1, 2019, Pages 1-9]
  • Natural gas Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
  • Nernst Equation Integration of a Vanadium Redox Flow Battery with a Proton Exchange Membrane Fuel Cell as an Energy Storage System [Volume 4, Issue 1, 2017, Pages 53-68]
  • Ni/Al2O3 Optimization of the preparation procedure of Ni/Al2O3 catalyst for steam reforming of n-butane [Volume 2, Issue 3, 2015, Pages 139-149]
  • Nickel catalyst Effect of K2O on the catalytic performance of Ni catalysts supported on nanocrystalline Al2O3 in CO2 reforming of methane [Volume 2, Issue 4, 2015, Pages 215-226]
  • Nickel catalyst A comparative study on the kinetics of carbon dioxide methanation over bimetallic and monometallic catalysts [Volume 3, Issue 1, 2016, Pages 59-71]
  • Nickel catalyst Investigation of the catalytic performance and coke formation of nanocrystalline Ni/SrO-Al2O3 catalyst in dry reforming of methane [Volume 3, Issue 4, 2016, Pages 315-322]
  • Ni P C Effect of temperature on kinetics of the hydrogen evolution reaction on Ni-P-C cathodes in alkaline solution [Volume 1, Issue 4, 2014, Pages 215-222]
  • Ni-P-CeO2 Preparation of Ni-P-CeO2 electrode and study on electrocatalytic properties for hydrogen evolution reaction [Volume 5, Issue 1, 2018, Pages 1-11]
  • Ni@Pt nanoparticles Ni@Pt core-shell nanoparticles as an improved electrocatalyst for ethanol electrooxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 109-119]
  • Ni/ zeolite catalyst Hydrogen production via steam reforming of LPG on Ni/Zeolite catalysts [Volume 1, Issue 4, 2014, Pages 233-238]
  • Non isothermal Modeling and Optimization of non - isothermal two- phase flow in the cathode gas diffusion layer of PEM fuel cell [Volume 2, Issue 3, 2015, Pages 159-168]
  • Numerical modeling Steam Reforming Integrated with Oxidation of Methanol in a Micro-Channel Reactor with Different Micro-Baffle Shapes [Volume 2, Issue 2, 2015, Pages 75-83]
  • Numerical modeling The effect of vertical injection of reactants to the membrane electrode assembly on the performance of a PEM fuel cell [Volume 3, Issue 3, 2016, Pages 167-182]

O

  • Optimal Intelligent Control Optimal Intelligent Control of Plug-in Fuel Cell Electric Vehicles in Smart Electric Grids [Volume 1, Issue 1, 2014, Pages 55-64]
  • Optimization Modeling and Optimization of non - isothermal two- phase flow in the cathode gas diffusion layer of PEM fuel cell [Volume 2, Issue 3, 2015, Pages 159-168]
  • Optimization Optimization of the preparation procedure of Ni/Al2O3 catalyst for steam reforming of n-butane [Volume 2, Issue 3, 2015, Pages 139-149]
  • Optimization Performance assessment of a SOFC cogeneration system for residential buildings located in eastern Iran [Volume 3, Issue 2, 2016, Pages 81-97]
  • Optimization Design and Investigation of Honeycomb End Plates for PEM Fuel Cells [Volume 4, Issue 3, 2017, Pages 189-199]
  • Optimization simulation Three-dimensional modeling of transport phenomena in a planar anode-supported solid oxide fuel cell [Volume 4, Issue 1, 2017, Pages 37-52]
  • ORR One –step synthesis of PdCo alloy nanoparticles decorated on reduced grahene oxide as an Electro-catalyst for Oxygen Reduction Reaction in Passive Direct Methanol Fuel Cells [Volume 2, Issue 1, 2015, Pages 27-33]
  • Oxidation Reforming Integrated with Oxidation in Micro-Heat Exchanger Reactor with Circular Micro-Channels [Volume 1, Issue 2, 2014, Pages 65-74]
  • Oxidation resistance Electrophoretic deposition of MnCr2O4 coating for solid oxide fuel cell metallic interconnects [Volume 1, Issue 1, 2014, Pages 21-26]
  • Oxidation resistance Co3O4 spinel protection coating for solid oxide fuel cell interconnect application [Volume 1, Issue 2, 2014, Pages 121-131]
  • Oxygen reduction reaction Oxygen reduction reaction on Pt/C at the presence of super paramagnetic of Fe3O4 nanoparticles for PEMFCs [Volume 1, Issue 1, 2014, Pages 41-46]
  • Oxygen reduction reaction Single walled carbon nanotube in the reaction layer of gas diffusion electrode for oxygen reduction reaction [Volume 1, Issue 2, 2014, Pages 75-82]
  • Oxygen reduction reaction Preparation of Nitrogen-Doped Graphene By Solvothermal Process as Supporting Material for Fuel Cell Catalysts [Volume 1, Issue 2, 2014, Pages 113-119]
  • Oxygen reduction reaction Using the Palladium as core and Platinum as shell for ORR [Volume 1, Issue 3, 2014, Pages 133-139]
  • Oxygen reduction reaction Electrodeposition of platinum nanoparticles on reduced graphene oxide as an efficient catalyst for oxygen reduction reaction [Volume 2, Issue 1, 2015, Pages 7-12]
  • Oxygen reduction reaction Synthesis of Supported Pt Alloy three Dimensional Rhombus Shapes Nanoparticles for Oxygen Reduction Reaction [Volume 2, Issue 2, 2015, Pages 121-130]
  • Oxygen reduction reaction Facile Synthesis of N, S-Doped Graphene from Sulfur Trioxide Pyridine Precursor for the Oxygen Reduction Reaction [Volume 4, Issue 3, 2017, Pages 231-240]

P

  • Palladium Palladium nanoparticles supported on carbon black powder as an effective anodic catalyst for application in a direct glucose alkaline fuel cell [Volume 3, Issue 1, 2016, Pages 11-17]
  • Palladium composite membrane Determination of thermodynamic parameters of hydrogen permeation of palladium membrane for considering the effect of stainless steel support [Volume 1, Issue 1, 2014, Pages 1-10]
  • Palladium-doped Nanostructured Palladium-Doped Silica Membrane Layer Synthesis for Hydrogen Separation: Effect of Activated Sublayers [Volume 6, Issue 1, 2019, Pages 1-9]
  • Palladium membrane Palladium composite membrane with high reversibility of CO2 poisoning [Volume 5, Issue 1, 2018, Pages 13-19]
  • Palladium nanoparticles Multi-walled carbon nanotubes supported palladium nanoparticles: Synthesis, characterization and catalytic activity towards methanol electro oxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 67-74]
  • Parametric study Parametric study of the influence of cooling channel dimensions on PEM fuel cell thermal performance [Volume 4, Issue 4, 2017, Pages 265-274]
  • Pd Using the Palladium as core and Platinum as shell for ORR [Volume 1, Issue 3, 2014, Pages 133-139]
  • Pd-Co nanoparticles One –step synthesis of PdCo alloy nanoparticles decorated on reduced grahene oxide as an Electro-catalyst for Oxygen Reduction Reaction in Passive Direct Methanol Fuel Cells [Volume 2, Issue 1, 2015, Pages 27-33]
  • Pd membrane Preparation of Pd composite membrane via organic-inorganic activation method in electroless plating technique [Volume 2, Issue 3, 2015, Pages 151-158]
  • Pd nanoparticles, Intermediate layer Preparation of Pd composite membrane via organic-inorganic activation method in electroless plating technique [Volume 2, Issue 3, 2015, Pages 151-158]
  • Pd substitution Application of Pd-Substituted Ni-Al Layered Double Hydroxides for the Hydrogen Evolution Reaction [Volume 2, Issue 4, 2015, Pages 253-261]
  • PEM Investigation of vessels pressure effect on PEM electrolyzer performance by using a new OneDimensional Dynamic Model [Volume 2, Issue 4, 2015, Pages 271-281]
  • PEMFC Development and Simulation of a PEM Fuel Cell model for Prediction of Water Content and Power Generation [Volume 4, Issue 4, 2017, Pages 289-299]
  • PEMFC Buckypaper-based catalytic electrode containing graphene nanoplates and ZrO2 nanorod composite to improve PEMFC performance [Volume 5, Issue 1, 2018, Pages 57-69]
  • PEMFC A review of the main mechanisms of catalyst layer degradation in polymer electrolyte membrane fuel cell (PEMFC) and different performance recovery methods [Volume 6, Issue 2, 2019, Pages 91-115]
  • PEM fuel cell Novel PVA/La2Ce2O7 hybrid nanocomposite membranes for application in proton exchange membrane fuel cells [Volume 1, Issue 2, 2014, Pages 105-112]
  • PEM fuel cell Performance Improvement of PEM Fuel Cells Using Air Channel Indentation; Part I: Mechanisms to Enrich Oxygen Concentration in Catalyst Layer [Volume 1, Issue 4, 2014, Pages 199-207]
  • PEM fuel cell Numerical analysis of reactant transport in the novel tubular polymer electrolyte membrane fuel cells [Volume 2, Issue 3, 2015, Pages 181-196]
  • PEM fuel cell Modeling and Optimization of non - isothermal two- phase flow in the cathode gas diffusion layer of PEM fuel cell [Volume 2, Issue 3, 2015, Pages 159-168]
  • PEM fuel cell Modeling and experimental study on the sealing gasket of proton exchange membrane fuel cells [Volume 3, Issue 3, 2016, Pages 213-220]
  • PEM fuel cell The effect of vertical injection of reactants to the membrane electrode assembly on the performance of a PEM fuel cell [Volume 3, Issue 3, 2016, Pages 167-182]
  • PEM fuel cell The Impact of Wettability on Effective Properties of Cathode Catalyst Layer in a Proton Exchange Membrane Fuel Cell [Volume 3, Issue 3, 2016, Pages 233-245]
  • PEM fuel cell The effect of increasing the multiplicity of flow fields contact surface on the performance of PEM fuel cell [Volume 4, Issue 1, 2017, Pages 69-83]
  • PEM fuel cell Finite Element Simulation and ANFIS Prediction of Dimensional Error Effect on distribution of BPP/GDL Contact Pressure in PEM Fuel Cell [Volume 4, Issue 2, 2017, Pages 125-138]
  • PEM fuel cell Effect of CO in the reformatted fuel on the performance of Polymer Electrolyte Membrane (PEM) fuel cell [Volume 4, Issue 2, 2017, Pages 153-165]
  • PEM fuel cell Design and Investigation of Honeycomb End Plates for PEM Fuel Cells [Volume 4, Issue 3, 2017, Pages 189-199]
  • PEM fuel cell Kinetic study of CO desorption from cathodic electrochemically treated carbon paper supported Pt electrodes [Volume 4, Issue 3, 2017, Pages 201-207]
  • PEM fuel cell Numerical study on the performance prediction of a proton exchange membrane (PEM) fuel cell [Volume 4, Issue 4, 2017, Pages 249-263]
  • PEM fuel cell Transient Three-dimensional Simulation of a Metal Hydride Hydrogen Storage Tank Interconnected to a PEM Fuel Cell by Heat Pipes [Volume 6, Issue 2, 2019, Pages 117-132]
  • PEM Fuel Cell (PEMFC) Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
  • PEM fuel cells The effect of inclined radial flow in proton exchange membrane fuel cells performance [Volume 1, Issue 3, 2014, Pages 141-152]
  • PEM fuel cells The simulation of novel annular shape on the Performance in Proton Exchange Membrane Fuel Cell [Volume 1, Issue 3, 2014, Pages 175-188]
  • PEM fuel cells Modeling and simulation of a new architecure stack applied on the PEM Fuel Cell [Volume 3, Issue 2, 2016, Pages 99-112]
  • PEM Fuel Cell Stack Energy Management Simulation in a PEM Fuel Cell System [Volume 2, Issue 1, 2015, Pages 1-6]
  • Performance Numerical study on the performance prediction of a proton exchange membrane (PEM) fuel cell [Volume 4, Issue 4, 2017, Pages 249-263]
  • Performance Enhancement Performance Improvement of PEM Fuel Cells Using Air Channel Indentation; Part I: Mechanisms to Enrich Oxygen Concentration in Catalyst Layer [Volume 1, Issue 4, 2014, Pages 199-207]
  • Performance Prediction Generalization of a CFD Model to Predict the Net Power in PEM Fuel Cells [Volume 6, Issue 1, 2019, Pages 23-37]
  • Permeability Morphological and physical study of Cu-Ni sintered porous wicks used in heat pipes and fuel cells [Volume 3, Issue 4, 2016, Pages 255-266]
  • Photocatalyst The effect of solvent of titanium precursor in the sol-gel process on the activity of TiO2 nanoparticles for H2 production [Volume 4, Issue 2, 2017, Pages 139-151]
  • Platinum Oxygen reduction reaction on Pt/C at the presence of super paramagnetic of Fe3O4 nanoparticles for PEMFCs [Volume 1, Issue 1, 2014, Pages 41-46]
  • Platinum Electrodeposition of platinum nanoparticles on reduced graphene oxide as an efficient catalyst for oxygen reduction reaction [Volume 2, Issue 1, 2015, Pages 7-12]
  • Platinum electrodeposition Electrochemical evaluation of electrodeposited platinum on a modified carbon substrate with cobalt, nickel and copper doped zinc oxide for the methanol oxidation reaction [Volume 5, Issue 1, 2018, Pages 49-55]
  • Platinum-Tungsten (PtW) Nanoparticles Green in-situ Fabrication of PtW/Poly Ethylen Dioxy Thiophene/Graphene Nanoplates/Gas Diffusion Layer (PtW/ PEDOT /GNP/GDL) Electrode and its Electrocatalytic Property for Direct Methanol Fuel Cells Application [Volume 6, Issue 1, 2019, Pages 39-58]
  • Plug-in Electric Vehicle Optimal Intelligent Control of Plug-in Fuel Cell Electric Vehicles in Smart Electric Grids [Volume 1, Issue 1, 2014, Pages 55-64]
  • Poisoning Palladium composite membrane with high reversibility of CO2 poisoning [Volume 5, Issue 1, 2018, Pages 13-19]
  • Polarization The effect of vertical injection of reactants to the membrane electrode assembly on the performance of a PEM fuel cell [Volume 3, Issue 3, 2016, Pages 167-182]
  • Polarization curve Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
  • Poly Ethylen Dioxy Thiophene (PEDOT) Green in-situ Fabrication of PtW/Poly Ethylen Dioxy Thiophene/Graphene Nanoplates/Gas Diffusion Layer (PtW/ PEDOT /GNP/GDL) Electrode and its Electrocatalytic Property for Direct Methanol Fuel Cells Application [Volume 6, Issue 1, 2019, Pages 39-58]
  • Polysulfone Investigation of ion transport and water content properties in anion exchange membranes based on polysulfone for solid alkaline fuel cell application [Volume 2, Issue 1, 2015, Pages 13-25]
  • Poly(vinyl alcohol) Novel PVA/La2Ce2O7 hybrid nanocomposite membranes for application in proton exchange membrane fuel cells [Volume 1, Issue 2, 2014, Pages 105-112]
  • Porosity Morphological and physical study of Cu-Ni sintered porous wicks used in heat pipes and fuel cells [Volume 3, Issue 4, 2016, Pages 255-266]
  • Porous Media Lattice Boltzmann modeling of two component gas diffusion in solid oxide fuel cell [Volume 2, Issue 4, 2015, Pages 263-270]
  • Porous stainless steel support Determination of thermodynamic parameters of hydrogen permeation of palladium membrane for considering the effect of stainless steel support [Volume 1, Issue 1, 2014, Pages 1-10]
  • Power density Effect of batch vs. continuous mode of operation on microbial desalination cell performance treating municipal wastewater [Volume 3, Issue 4, 2016, Pages 281-290]
  • Power density The effect of increasing the multiplicity of flow fields contact surface on the performance of PEM fuel cell [Volume 4, Issue 1, 2017, Pages 69-83]
  • Power density Numerical study on the performance prediction of a proton exchange membrane (PEM) fuel cell [Volume 4, Issue 4, 2017, Pages 249-263]
  • Pressure-composition isotherm Synthesis, characterization and hydrogen storage properties of Mm(Ni,Co,Mn,Al)5 alloy [Volume 1, Issue 2, 2014, Pages 83-94]
  • Pressure drop Parametric study of the influence of cooling channel dimensions on PEM fuel cell thermal performance [Volume 4, Issue 4, 2017, Pages 265-274]
  • Pressure Swing Adsorption Investigation of carbon dioxide capture from hydrogen using the thermal pressure swing adsorption process: Central composite design modeling [Volume 4, Issue 1, 2017, Pages 13-26]
  • Protection agent Preparation and Characterization of Electrocatalyst Nanoparticles for Direct Methanol Fuel Cell Applications Using β-D-glucose as Protection Agent [Volume 4, Issue 1, 2017, Pages 1-11]
  • Proton conductivity Novel PVA/La2Ce2O7 hybrid nanocomposite membranes for application in proton exchange membrane fuel cells [Volume 1, Issue 2, 2014, Pages 105-112]
  • Proton exchange membrane Studies on the SPEEK membrane with low degree of sulfonation as a stable proton exchange membrane for fuel cell applications [Volume 3, Issue 3, 2016, Pages 221-232]
  • Proton exchange membrane fuel cell Oxygen reduction reaction on Pt/C at the presence of super paramagnetic of Fe3O4 nanoparticles for PEMFCs [Volume 1, Issue 1, 2014, Pages 41-46]
  • Proton exchange membrane fuel cell Electrochemical Study of Hydrogen Adsorption/Reduction (HAR) Reaction on Graphene Oxide as Electrocatalyst for Proton Exchange Membrane Fuel Cells [Volume 2, Issue 2, 2015, Pages 99-107]
  • Proton exchange membrane fuel cell Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior [Volume 3, Issue 1, 2016, Pages 1-10]
  • Proton exchange membrane fuel cell Integration of a Vanadium Redox Flow Battery with a Proton Exchange Membrane Fuel Cell as an Energy Storage System [Volume 4, Issue 1, 2017, Pages 53-68]
  • Proton Exchange Membrane Fuel Cell (PEMFC) Electrodeposition of platinum nanoparticles on reduced graphene oxide as an efficient catalyst for oxygen reduction reaction [Volume 2, Issue 1, 2015, Pages 7-12]
  • Proton Exchange Membrane Fuel Cells Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
  • Pt Using the Palladium as core and Platinum as shell for ORR [Volume 1, Issue 3, 2014, Pages 133-139]
  • Pt Effect of platinum on Ceria supported Cu catalysts for PrOx process in fuel processors [Volume 1, Issue 1, 2014, Pages 1-100]
  • Pt (100) Interaction of atomic hydrogen with monometallic Au(100), Cu(100), Pt(100) surfaces and surface of bimetallic Au@Cu(100), Au@Pt(100) overlayer systems: The role of magnetism [Volume 4, Issue 3, 2017, Pages 209-218]
  • PtFeCo alloy Synthesis of Supported Pt Alloy three Dimensional Rhombus Shapes Nanoparticles for Oxygen Reduction Reaction [Volume 2, Issue 2, 2015, Pages 121-130]
  • Pt nanoparticles Platinum nanoparticles/functionalized carbon nanoparticles composites supported on the carbon-ceramic electrode and their electroactivity for ethanol oxidation [Volume 5, Issue 1, 2018, Pages 35-47]
  • Purge time Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
  • PVD Coating Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]

R

  • Radial channel flow The effect of inclined radial flow in proton exchange membrane fuel cells performance [Volume 1, Issue 3, 2014, Pages 141-152]
  • Radiation heat transfer Three-dimensional modeling of transport phenomena in a planar anode-supported solid oxide fuel cell [Volume 4, Issue 1, 2017, Pages 37-52]
  • Realization of Microstructure A new approach to microstructure optimization of solid oxide fuel cell electrodes [Volume 4, Issue 2, 2017, Pages 93-102]
  • Relative smoothness Preparation of Pd composite membrane via organic-inorganic activation method in electroless plating technique [Volume 2, Issue 3, 2015, Pages 151-158]
  • Response surface methodology Hydrothermal synthesis of nano-size zirconia using commercial zirconia powder: process optimization through response surface methodology [Volume 1, Issue 3, 2014, Pages 163-173]
  • Response surface methodology Investigation of carbon dioxide capture from hydrogen using the thermal pressure swing adsorption process: Central composite design modeling [Volume 4, Issue 1, 2017, Pages 13-26]
  • Reynolds number An Experimental Investigation on Simultaneous Effects of Oxygen Ratio and Flow-Rate in SOFCs Performance Fueled by a Mixture of Methane and Oxygen [Volume 6, Issue 1, 2019, Pages 11-22]

S

  • Saturation Modeling and Optimization of non - isothermal two- phase flow in the cathode gas diffusion layer of PEM fuel cell [Volume 2, Issue 3, 2015, Pages 159-168]
  • Sensitivity analysis A Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System [Volume 1, Issue 4, 2014, Pages 223-231]
  • Si Study the stability of Si, Ge, Fe and Co in the interior surface of metallic carbon nanotube for hydrogen storage [Volume 2, Issue 3, 2015, Pages 197-205]
  • Silica membrane Nanostructured Palladium-Doped Silica Membrane Layer Synthesis for Hydrogen Separation: Effect of Activated Sublayers [Volume 6, Issue 1, 2019, Pages 1-9]
  • Silica membrane Silica membrane performance for hydrogen separation from methanol steam reforming products: Assessment of different multistage membrane schemes [Volume 6, Issue 1, 2019, Pages 59-70]
  • Simulation Modeling of Multi-population Microbial Fuel and Electrolysis Cells Based on the Bioanode Potential Conditions [Volume 1, Issue 4, 2014, Pages 247-260]
  • Single-phase The effect of inclined radial flow in proton exchange membrane fuel cells performance [Volume 1, Issue 3, 2014, Pages 141-152]
  • Single-phase The simulation of novel annular shape on the Performance in Proton Exchange Membrane Fuel Cell [Volume 1, Issue 3, 2014, Pages 175-188]
  • Single-phase Modeling and simulation of a new architecure stack applied on the PEM Fuel Cell [Volume 3, Issue 2, 2016, Pages 99-112]
  • Sintered porous wicks Morphological and physical study of Cu-Ni sintered porous wicks used in heat pipes and fuel cells [Volume 3, Issue 4, 2016, Pages 255-266]
  • Smart Grids Optimal Intelligent Control of Plug-in Fuel Cell Electric Vehicles in Smart Electric Grids [Volume 1, Issue 1, 2014, Pages 55-64]
  • Sodalite nanozeolite Electrocatalytic oxidation of glucose on the modified carbon paste electrode with sodalite nanozeolite for fuel cell [Volume 2, Issue 1, 2015, Pages 47-58]
  • SOFC Multi-objective optimization of two hybrid power generation systems for optimum selection of SOFC reactants heat exchangers mid-temperatures [Volume 4, Issue 3, 2017, Pages 175-188]
  • SOFC Energy and economic comparison of SOFC-GT, MCFC-GT, and SOFC-MCFC-GT hybrid systems [Volume 4, Issue 4, 2017, Pages 275-287]
  • SOFC Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
  • SOFC interconnect Co3O4 spinel protection coating for solid oxide fuel cell interconnect application [Volume 1, Issue 2, 2014, Pages 121-131]
  • Solar light The effect of solvent of titanium precursor in the sol-gel process on the activity of TiO2 nanoparticles for H2 production [Volume 4, Issue 2, 2017, Pages 139-151]
  • Solid Alkaline Fuel Cell Investigation of ion transport and water content properties in anion exchange membranes based on polysulfone for solid alkaline fuel cell application [Volume 2, Issue 1, 2015, Pages 13-25]
  • Solid oxide fuel cell Electrophoretic deposition of MnCr2O4 coating for solid oxide fuel cell metallic interconnects [Volume 1, Issue 1, 2014, Pages 21-26]
  • Solid oxide fuel cell Lattice Boltzmann modeling of two component gas diffusion in solid oxide fuel cell [Volume 2, Issue 4, 2015, Pages 263-270]
  • Solid oxide fuel cell Energy Price Analysis of a Biomass Gasification-Solid Oxide Fuel Cell-Gas Turbine Power Plant [Volume 3, Issue 1, 2016, Pages 45-58]
  • Solid oxide fuel cell Performance assessment of a SOFC cogeneration system for residential buildings located in eastern Iran [Volume 3, Issue 2, 2016, Pages 81-97]
  • Solid oxide fuel cell Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
  • Solid oxide fuel cell A new approach to microstructure optimization of solid oxide fuel cell electrodes [Volume 4, Issue 2, 2017, Pages 93-102]
  • Solid oxide fuel cell Simulation of a Solid Oxide Fuel Cell with External Steam Methane Reforming and Bypass [Volume 4, Issue 2, 2017, Pages 103-118]
  • Solid Oxide Fuel Cells La0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study [Volume 1, Issue 4, 2014, Pages 239-246]
  • Solid Oxide Fuel Cells Three-dimensional modeling of transport phenomena in a planar anode-supported solid oxide fuel cell [Volume 4, Issue 1, 2017, Pages 37-52]
  • Solid Oxide Fuel Cells (SOFCs) An Experimental Investigation on Simultaneous Effects of Oxygen Ratio and Flow-Rate in SOFCs Performance Fueled by a Mixture of Methane and Oxygen [Volume 6, Issue 1, 2019, Pages 11-22]
  • SPEEK Studies on the SPEEK membrane with low degree of sulfonation as a stable proton exchange membrane for fuel cell applications [Volume 3, Issue 3, 2016, Pages 221-232]
  • SPEEK Dynamic investigation of hydrocarbon proton exchange membrane Fuel Cell [Volume 4, Issue 3, 2017, Pages 219-230]
  • Spinel Electrophoretic deposition of MnCr2O4 coating for solid oxide fuel cell metallic interconnects [Volume 1, Issue 1, 2014, Pages 21-26]
  • Stack Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
  • State Variables New Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell [Volume 2, Issue 4, 2015, Pages 241-252]
  • Steam reforming Reforming Integrated with Oxidation in Micro-Heat Exchanger Reactor with Circular Micro-Channels [Volume 1, Issue 2, 2014, Pages 65-74]
  • Steam reforming Hydrogen production by steam reforming of dimethyle ether over Cu/ZnO/Al2O3 and H-ZSM-5 catalysts: An experimental and modeling study [Volume 1, Issue 3, 2014, Pages 153-161]
  • Steam reforming Steam Reforming Integrated with Oxidation of Methanol in a Micro-Channel Reactor with Different Micro-Baffle Shapes [Volume 2, Issue 2, 2015, Pages 75-83]
  • Steam reforming Hydrogen production via steam reforming of LPG on Ni/Zeolite catalysts [Volume 1, Issue 4, 2014, Pages 233-238]
  • Steam reforming Optimization of the preparation procedure of Ni/Al2O3 catalyst for steam reforming of n-butane [Volume 2, Issue 3, 2015, Pages 139-149]
  • Steam Turbine Exergy Analysis of a Molten Carbonate Fuel Cell-Turbo Expander-Steam Turbine Hybrid Cycle [Volume 3, Issue 4, 2016, Pages 267-279]
  • Steam Turbine Multi-objective optimization of two hybrid power generation systems for optimum selection of SOFC reactants heat exchangers mid-temperatures [Volume 4, Issue 3, 2017, Pages 175-188]
  • Strontium Investigation of the catalytic performance and coke formation of nanocrystalline Ni/SrO-Al2O3 catalyst in dry reforming of methane [Volume 3, Issue 4, 2016, Pages 315-322]
  • Structural properties Synthesis, characterization and hydrogen storage properties of Mm(Ni,Co,Mn,Al)5 alloy [Volume 1, Issue 2, 2014, Pages 83-94]

T

  • Thermal Conductivity Morphological and physical study of Cu-Ni sintered porous wicks used in heat pipes and fuel cells [Volume 3, Issue 4, 2016, Pages 255-266]
  • Thermal coupling Transient Three-dimensional Simulation of a Metal Hydride Hydrogen Storage Tank Interconnected to a PEM Fuel Cell by Heat Pipes [Volume 6, Issue 2, 2019, Pages 117-132]
  • Thermal Efficiency Energy Management Simulation in a PEM Fuel Cell System [Volume 2, Issue 1, 2015, Pages 1-6]
  • The temperature distribution Parametric study of the influence of cooling channel dimensions on PEM fuel cell thermal performance [Volume 4, Issue 4, 2017, Pages 265-274]
  • TiO2 nanoparticles The effect of solvent of titanium precursor in the sol-gel process on the activity of TiO2 nanoparticles for H2 production [Volume 4, Issue 2, 2017, Pages 139-151]
  • TiO2 nanotube arrays (TNAs) A high performance lithium-ion battery using LiNa0.02K0.01FePO4/C as cathode material and anatase TiO2 nanotube arrays as anode material [Volume 4, Issue 1, 2017, Pages 27-35]
  • Titanium Nitride (TiN) Coating Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
  • Transient Model Integration of a Vanadium Redox Flow Battery with a Proton Exchange Membrane Fuel Cell as an Energy Storage System [Volume 4, Issue 1, 2017, Pages 53-68]
  • Turbo Expander Exergy Analysis of a Molten Carbonate Fuel Cell-Turbo Expander-Steam Turbine Hybrid Cycle [Volume 3, Issue 4, 2016, Pages 267-279]

U

  • Uniform pressure Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior [Volume 3, Issue 1, 2016, Pages 1-10]
  • Uniform temperature distribution Parametric study of the influence of cooling channel dimensions on PEM fuel cell thermal performance [Volume 4, Issue 4, 2017, Pages 265-274]
  • Utilization factor Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]

V

  • Vanadium Redox Battery Integration of a Vanadium Redox Flow Battery with a Proton Exchange Membrane Fuel Cell as an Energy Storage System [Volume 4, Issue 1, 2017, Pages 53-68]

W

  • Wastewater treatment Effect of batch vs. continuous mode of operation on microbial desalination cell performance treating municipal wastewater [Volume 3, Issue 4, 2016, Pages 281-290]
  • Water diagnosis Development and Simulation of a PEM Fuel Cell model for Prediction of Water Content and Power Generation [Volume 4, Issue 4, 2017, Pages 289-299]

Z

  • Zeolite 5A Investigation of carbon dioxide capture from hydrogen using the thermal pressure swing adsorption process: Central composite design modeling [Volume 4, Issue 1, 2017, Pages 13-26]
  • Zeolite Membrane Effect of Dehydration Temperature on the H2 Separation Potential of Hydroxy Sodalite Zeolite Membranes [Volume 1, Issue 4, 2014, Pages 209-214]
  • ZrO2 nanorod Buckypaper-based catalytic electrode containing graphene nanoplates and ZrO2 nanorod composite to improve PEMFC performance [Volume 5, Issue 1, 2018, Pages 57-69]